Burley Tandem Supplement Manual - Página 6

Procurar online ou descarregar pdf Manual para Bicicleta Burley Tandem Supplement. Burley Tandem Supplement 12 páginas. Suppliers association multi-speed bike manual

Imprimir página

Make sure wheels are held securely; you should not be able to

rock or shift wheels. Never ride with the le vers in OPEN position.

Improperly installed wheels can fall off, causing accident and

harmful or fatal injury.

B. Tightening the Seat Post Clamps

IMPORTANT: If one of your seatpost clamps is taller than the other,

install the taller one on the captain's (front) seat post.

Your Burley tan dem comes with removable seat

post clamps. When in stall ing the seat post clamps or

ad just ing seat post height, note that the slot in the

seat tube must align with the slot in the seat post

clamp (see illustration at right).

IMPORTANT: Always keep a thin ﬁ lm of lightweight grease on your

seat posts to prevent corrosion and to make adjustment easier.

Also, do not tighten the seat post clamp if the seat post is inserted only to where you

can still see the minimum insertion line. Likewise, do not tighten the clamp if the

seat post is inserted so deeply in the seat tube as to ob scure the ta pered upper edge

of the seat post. The clamp should only be tightened below this ta pered portion of

the seat post, and above the min i mum insertion line.

C. Tightening the Adjustable Stoker Stem

If your bike is equipped

with an ad just able stok er

stem, note that there are

two bolts se cur ing the

alloy stem. To adjust the

stem, loos en both bolts

(see il lus tra tion), slide the

al loy stem in or out, and

then se cure ly tight en the binder bolt and stem bolt as shown with the ap pro pri ate

wrench es. Ver i fy that the han dle bars will not ro tate. Make sure the in sert does not

ex tend past the max i mum ex ten sion line.

Burley Tandem Suppplement

Tighten

expander bolt

on alloy insert

Tighten binder

bolt on ChroMoly

sleeve

Do not extend past

maximum extension

line