Burley NOMAD RACK Manual do proprietário e manual de segurança - Página 7

Install Tailgate and Splashguard

Snap the tailgate into place as shown in the illustration below. Start by ensuring there is

sufﬁ cient slack in the 1" webbing to allow you to loop the webbing over the side panel

and lock it into place in the corresponding side release buckle sewn to the inside of

the side panel. Repeat for the other side of the tailgate. In a similar fashion, attach the

front splashguard to the front side panels. The tailgate and splashguard are adjustable

to accommodate any size or amount of cargo you wish to carry in your Nomad. Simply

tighten or loosen the 1" webbing as required. For normal cargo carrying modes, the

tailgate and splashguard should be adjusted so they are tight to minimize the entry

of water and dirt.

Tailgate

Splashguard

Burley Nomad Owner's Instruction and Safety Manual