Burlington B1 UP 3TH Manual - Página 3
Procurar online ou descarregar pdf Manual para Luminárias de casa de banho Burlington B1 UP 3TH. Burlington B1 UP 3TH 6 páginas. Upstand ceramic basins
Imprimir páginaBEFORE YOU START
Important Pre-Installation Notes
Please check for any hidden pipes or electrical cables before drilling holes in the floor or walls. When using power tools always
follow the manufacturer's user instructions. This installation guide details fitting to a solid wall. If your bathroom has studded/
plasterboard walls, please use appropriate plasterboard fixings.
Make sure that the wall can take the weight of the products before undertaking the installation.
Fittings, when over tightened can create stress within the basin material which may in time cause the failure of the product.
Care should also be taken when fitting a tap and waste to the basin in order to prevent similar stress related failures. Waste
fittings should be carefully bedded in silicone and the back nut hand tightened; an additional quarter turn using a suitable
spanner is sufficient to create the required watertight seal.
If any maintenance is required then it must be carried out by a qualified Plumber. The manufacturer reserves the right to make
technical modifications without prior notice.
Warning
Ceramic basins can be heavy, please ensure the wall the product is being fitted to has enough reinforcement to support the
weight of the basin, pedestal or washstand.
B1 UP - 20kg
B2 UP - 20kg
Compatibility
With Pedestal - P6 for B1 UP and B2 UP
With Washstand - T22A for B1 UP / T23A for B2 UP
All require suitable wall mounting bolts - not supplied.
Tools Required (not supplied):
Drill + Drill Bit 6mm Ø
Tape Measure
Spirit Level
3
Pencil
Safety Goggles
3
Water Based
Silicone Sealant
3