Diamond SBM 40 F Instruções de utilização e instalação - Página 7

Procurar online ou descarregar pdf Instruções de utilização e instalação para Equipamento comercial para alimentos Diamond SBM 40 F. Diamond SBM 40 F 8 páginas. Wall refrigerated salad'bar

Imprimir página

Unscrew the protective screw, put the mirror in

the slide of the upright and fix again the screw

as well as the back screw B (Picture F on page

2).

Attention: Both wires should be outside (Picture

At this stage, the mirror is at its place but must

be hold.

5.Mounting of the top parts

A. Mounting of the roof

Remove the protective film from the roof and put

the roof on both uprights. (Picture J)

B. Mounting of the top shelf

Place the shelf on the roof with both plastic sha-

ped parts up. (Picture K)

Fix the screws A (Picture F on page 2).

C. Mounting of the plexiglas

Remove the protective film.

Place the plexiglas under the stainless steel roof

(Picture L) and fix the screws D (Picture F on

page 2).

6. Connection

Connect every wire. ( Picture M)

Picture I

Picture J

7. Fix the protection for wires

Fix the stainless steel protection for wi-

res with the screws B (Picture F on

page 2 + Picture N)

8. Final fixation of the mirror

Picture K

Insert both screws C on the back top of

the uprights (Picture F on page 2 + Pic-

ture O)

Picture L

Your salad'bar is ready. You can place it and plug in with normalized 220-240 V ~

according to the instructions manual

Photo D

Photo G

Photo O

Photo M

Photo N