Diamond VK38-180 Manual de instalação - Página 5

Procurar online ou descarregar pdf Manual de instalação para Equipamento comercial para alimentos Diamond VK38-180. Diamond VK38-180 13 páginas.

Set new temperature:

Press this key and the display shows the set temperature.

Press this key to increase the set temperature.

Press this key to lower the set temperature.

Press this key to save the new settings. The display will flash with the new value and will

then return to normal reading.

Changing of parameters:

Press this key continuously for 5 seconds to access the list of parameters. The display will

show the number of the parameter and after 2 seconds the value.

Press this key to increase the value.

Press this key to lower the value.

Press this key to save the new settings. The display will flash with the new value and will

then return to normal reading.

See table of parameters from page 47.

Alarm codes:

PF1 Flashing in the display: indicates that the cabinet sensor is defective.

The cabinet will strive to keep the set temperature until it has been repaired.

Maintenance and cleaning

Switch the cooler off at the socket.

The cabinet must be periodically cleaned. Clean the external and internal surfaces of the cabinet

with a light soap solution and subsequently wipe dry. External surfaces can be maintained using

steel oil.

Do NOT use cleansers containing chlorine or other harsh cleansers, as these can damage the

stainless steel surfaces and the internal cooling system.

Clean the condenser and the compressor compartment using a vacuum cleaner and a stiff brush.

Do NOT hose the compressor compartment with water as this can cause short circuits and damage

on the electrical parts.