Burmester 032 Manual do Proprietário - Página 12

Procurar online ou descarregar pdf Manual do Proprietário para Amplificador Burmester 032. Burmester 032 16 páginas. Integrated amplifier

The integrated amplifier 032 offers a sophisticated error mounting system, which protects the unit as well as the

connected loudspeakers from damage, should certain errors occur.

If any of the following errors occurs, the loudspeaker relays are automatically switched off and the type of error is

indicated in the display (3). After the cause for the error has ceased, the loudspeakers will automatically come back

on.

If the 032 under full power exceeds the maximum allowable operating temperature, the

Overheating

protection system acts as follows:

• The amplifier is muted and the speaker outputs are switched off

• The display shows TEMP

• The volume is automatically reduced by four steps

If the 032 returns to below the maximum allowable temperature within three minutes, the

speaker outputs are automatically switched back on.

If the 032 does not cool down to below the maximum allowable temperature within three

minutes, the unit switches automatically into stand-by mode. The display continues to

indicate TEMP and the stand-by LED also illuminates. Please leave the 032 turned off for

a while, allowing it to cool down.

If high currents overload the power transistors or DC current is detected at the outputs, the

Overload/DC offset

protection system of the 032 acts as follow:

• The amplifier is muted and the speaker outputs are switched off

• The display shows OF/CU

• Automatic lowering of volume level until the problem is resolved

If lowering the volume resolves the problem, the speaker outputs are automatically switched

back on.

If the volume is lowered all the way to 0, the 032 switches automatically into stand-by mode.

The display continues to show OF/CU but the stand-by LED also illuminates. In this case,

use the AC mains switch (24) to switch the unit off and check all connections. If you

cannot detect an external problem, please contact your dealer.

ERROR PROTECTION