Panasonic AG-HPX250EN Ajuste elétrico - Página 2

Procurar online ou descarregar pdf Ajuste elétrico para Câmara de vídeo Panasonic AG-HPX250EN. Panasonic AG-HPX250EN 20 páginas.
Também para Panasonic AG-HPX250EN: Manual de Instruções (36 páginas)

Panasonic AG-HPX250EN Ajuste elétrico

1. Preparation of adjustment

When an electrical adjustment is executed, the PC EVR software is used.

1-1. PC EVR software

1-1-1. Required tools and equipment for PC EVR software

When the PC EVR software is used, the following tools are required.
NAME
PC EVR
software
USB Driver for AG-HPX250/260 EVR Adjustment
USBC cable A type ↔ mini B
Personal Computer
*OS: WINDOWS XP SP2 / SP3

1-1-2. Installation method of USB driver

This USB driver is only for Windows XP.
1. Download the file "USB Driver for AG-HPX250/260 EVR Adjustment (VSI5386A)" from Global Service WEB
Site and extract it.
2. This camera recorder is set to COM mode.
< Setting method of COM mode >
2-1. Turn the power on and confirm that the camera recorder is set to CAMERA mode.
2-2. The COM mode is set by hold down the "PLAY (Tilt the operation lever in the ▲ direction)" button,
"EXIT" button and "RESET" button at the same time for three seconds or more. (The character of "COM"
blinks to the LCD screen when the COM mode is set.).
NOTE: To cancel the COM mode, execute the operation of the same button as the setting. (Com mode cannot be
cancelled if the power has been switched off and back on again.).
3. Connect the USB cable between USB connector and PC.
Part Number
VVS0095
VSI5386A
---
---
USB cable
A type
Pcs.
1
Download from the Global Service WEB site.
1
Download from the Global Service WEB site.
1
1
*NOTE:
USB connector
Mini-B
ELE-1
Remark