Panasonic AGDVC20P - 3 CCD DV CAMCORDER Manual de Instruções - Página 29

Procurar online ou descarregar pdf Manual de Instruções para Câmara de vídeo Panasonic AGDVC20P - 3 CCD DV CAMCORDER. Panasonic AGDVC20P - 3 CCD DV CAMCORDER 42 páginas. Agmini-dv camera/recorder
Também para Panasonic AGDVC20P - 3 CCD DV CAMCORDER: Manual de Instruções (40 páginas), Manual de Instruções (42 páginas)

Imprimir página

Panasonic AGDVC20P - 3 CCD DV CAMCORDER Manual de Instruções

Using the DV Cable for Recording

(Digital Dubbing)

By connecting other digital video equipment with DV terminal

and the camera-recorder by using the DV cable (optional) 1,

high-image-quality dubbing can be done in digital format.

≥Set to Tape Playback Mode. (Player/recorder)

Connect the camera-recorder and digital video

equipment with the DV cable.

Set [ADVANCE] >> [REC STDBY] >> [YES]. (Recorder)

≥You do not have to follow this step when the remote control is

used in the digital dubbing.

Start playback. (Player)

Start recording. (Recorder)

Press the [3] button to select [¥/;] icon.

≥Or, without operating step 2

While pressing the [¥REC] button on the remote control,

press the [1] button.

Press the [3] button to select the [¥/;] icon again or

press the [;] button on the remote control to stop

recording. (Recorder)

Stop playback. (Player)

Edit mode

You can connect a digital video unit equipped with a DV

connector and digitally transfer video and audio signals as well

as time code.

≥Before proceeding to connect or disconnect DV (IEEE1394)

cable, be absolutely sure to turn off the power of the units.

≥Before proceeding to connect the

unit which uses a 6-pin type DV

connector, carefully check the

shape of the DV (IEEE1394) cable

and the connectors on the DV

(IEEE1394) cable. Connecting a

connector upside down may

damage the parts inside the unit

and cause malfunctioning. Furthermore, connect the DV

(IEEE1394) cable to the unit which uses a 6-pin type DV

connector first.

≥When recording signals from an external unit, first check that

video signals are supplied.

≥While signals from an external unit are being recorded, do not

stop output on the external unit side or disconnect any of

cables. This may lead to a failure to recognize the signals

when you do recording again.

≥Do not apply force when connecting DV (IEEE1394) cable to

DV connector as this may damage the connector.

To cancel the standby for recording

When the camera-recorder is standby for recording, press the

[4] button and select the [∫] icon.

≥Do not plug or unplug the DV cable during dubbing, or the

dubbing may not be completed properly.

≥If a picture (bilingual video, etc.) containing main sound and

sub sound has been dubbed, select the desired sound by

[SETUP] >> [AUDIO OUT] on playback.

≥Even if you use a device equipped with DV terminals such as

IEEE1394, you may not be able to perform digital dubbing in

some cases. For more information, see the instructions for

equipment connected.

≥Regardless of the menu settings on the recorder, digital

dubbing is carried out in the same mode as the [AUDIO REC]

mode of the playback tape.

≥The images on the recorder monitor may be disturbed, but it

does not affect the recorded images.

≥If a picture containing a copyright protection signal (copy

guard) is recorded by the camera-recorder, the picture is

distorted by mosaic-like patterns at playback.

≥When wide images are input, the display such as the menu

screen or the operation icon is expanded horizontally.

≥While pictures are input from the DV terminal, the operation

icon blinks on instead of appearing from the side of the screen

when you press the [ENTER] button.