AquaScape Ultra 91005 Instruções e manutenção - Página 5

Procurar online ou descarregar pdf Instruções e manutenção para Bomba de água AquaScape Ultra 91005. AquaScape Ultra 91005 16 páginas.
Também para AquaScape Ultra 91005: Instruções de instalação e manutenção (16 páginas)

Imprimir página

• The Ultra

Water Pump includes an assortment of ﬁ ttings

for a wide variety of plumbing options. Select and install

the appropriate ﬁ tting(s) for your application.

• The included Multi-Hose Adapter(s) is (are) designed to

accommodate different diameters of tubing and ideal for

applications using a single plumbing line.

• The Multi-Hose Adapter can be threaded directly into the

discharge of the pump.

• If using a diameter of pipe that is larger than the smallest

section of the Multi-Hose Adapter, trim off the smaller

sections to prevent ﬂ ow restriction.

• The included threaded

FPT 90° elbow allows the

water ﬂ ow to be directed

horizontally, perfect for

fountain basin applications

where vertical space is

limited.

• To install the elbow, attach

the included MPT Coupling

to the discharge of the pump.

Then thread the collared elbow ﬁ tting to the MPT Coupling

to attach it to the pump.

• The collared connections allow the pump to be quickly

and easily disconnected from the tubing for pump removal

or maintenance.

aquascapeinc.com |

CAN 1-866-766-3426 |

• The convenient included 1/2" Valve (400/550/800) or

3/4" 3-Way Valve (1100/1500/2000) provide the ability to

customize ﬂ ow rates.

• The included ﬂ ow control

valve can be installed directly

into the pump discharge or

installed horizontally using the

threaded FPT 90° elbow.

• Once installed, simply adjust

the valve(s) to dial in the

desired water ﬂ ow.

• When using the 3-Way Valve, close off any unused valves

to maximize water ﬂ ow to the valves in use.

• Attach the tubing to the

selected ﬁ tting(s) using a

twisting motion. If the tubing

ﬁ ts loosely, a hose clamp

(not included) can be used to

secure the attachment.

• In some instances the tubing

may be difﬁ cult to attach to

the selected ﬁ tting. If this

is the case, we recommend

heating the hose with a

hair dryer or simply dipping

the hose in very hot water

for a few seconds prior to

attachment. Lubrication can

also be used; we recommend

silicone grease or olive oil.

• Connect the other end of the

pump tubing to the decorative fountain or pond ﬁ lter.

US 1-866-877-6637