Panasonic WV-NP502 Manual de instalação - Página 13
Procurar online ou descarregar pdf Manual de instalação para Câmara de vídeo Panasonic WV-NP502. Panasonic WV-NP502 32 páginas. Ip video cameras
Também para Panasonic WV-NP502: Gráfico de comparação (6 páginas), Nota de integração (8 páginas)
Imprimir página
Angle adjustment
Be sure to loosen the screw of this product
mount bracket when the camera angle is
adjusted. If the camera angle is changed when
the screw is tight, excessive force is applied to
the camera mount bracket and camera, and
accordingly they may be damaged. Be sure to
tighten the screw securely after camera angle
adjustment.
Radio disturbance
When this product is used near TV/radio anten-
na, strong electric field or magnetic field (near a
motor, a transformer or a power line), images
may be distorted and noise sound may be pro-
duced.
PoE (Power over Ethernet)
Use a PoE hub/device that is compliant with
IEEE802.3af standard.
Router
When connecting this product to the Internet,
use a broadband router with the port forward-
ing function (NAT, IP masquerade).
Refer to the Operating Instructions (PDF) for
further information about the port forwarding
function.
Heat dissipation
This camera is designed to dissipate heat
inside this product by intaking air from the
intake port on the rear to the exhaust port on
the top. Therefore, do not block those ports.
Approximately 5 cm of clearance from the
intake port and exhaust port to a wall shall be
left.
10BASE T/100BASE-TX
ACT
LINK
MONITOR OUT
GND 4 3 2 1 ALARM IN 1/DAY/NIGHT IN
ALARM IN 3/
AUX OUT/EXPOSURE OUT
Time & date setting
It is necessary to set the time and date before
putting this product into operation. Refer to the
Operating Instructions (PDF) on the provided
CD-ROM for further information about the set-
ting.
Intake port
AUDIO OUT
MIC/LINE IN
INITIAL
SET
POWER
SD CARD/ABF
12V = IN
EXT I/O
ALARM IN 2/ALARM OUT
Exhaust port
13