Diamond Antenna SG-M911 Montagem - Página 2

Procurar online ou descarregar pdf Montagem para Antena Diamond Antenna SG-M911. Diamond Antenna SG-M911 2 páginas. 6m/2m/70cm tri-band mobile antenna

Imprimir página

Assembly Diagram

MOBILE ANTENNA: For ease of installation, DIAMOND ANTENNA MOBILE MOUNTS are strongly recommended. In

some cases, mobile mounts of different manufacturers' may not interface well with DIAMOND Antennas. DIAMOND Mobile

antennas are pre-tuned to give best possible performance on the band(s) for which they are designed. In some installations,

minor VSWR adjustment may be made by moving the antenna up/down at the base end. Two set screws at the foldover hinge

allow for adjustment.

LARGE GVW TRUCK AND OFF ROAD VEHICLES: Due to the excessive vehicle vibration, antennas exceeding 45" are

not recommended. In any event, antennas damaged by excessive vibration are not covered by warranty. Any

tampering, cutting or attempted adjustment of this antenna beyond our recommendations may void all warranty. If you have

any questions, please call Diamond Customer Service Dept. at (760) 744-0900.

metric 1.5mm

allen wrench

#091101

upper whip element

set screws M4X3

#091102

lower whip element

set screws M4X3

#091103

foldover hinge

#091104

matching section

LEASE

WARNING!

EAD

EFORE

NSTALLATION

Foldover Diagram

VSWR (nominal)