AquaStar 125B LP Manual de instruções de instalação e funcionamento - Página 16
Procurar online ou descarregar pdf Manual de instruções de instalação e funcionamento para Aquecedor de água AquaStar 125B LP. AquaStar 125B LP 17 páginas. Automatic instantaneous type water heaters
Também para AquaStar 125B LP: Manual de instruções de instalação e funcionamento (16 páginas)
Imprimir páginaNominal Iron Pipe Size*
MAXIMUM LENGTH
Semi-rigid Tubing
MAXIMUM LENGTH
* Flex tubing greatly reduces capacity and, therefore, is not recommended.
Minimum Diameter
* NOTE: Vent size must not be restricted. Installation must comply with national fuel gas code venting requirements
for a 117,000 Btu Category I appliance and any applicable local codes.
** NOTE: Minimum vent height must be 6 feet, provided there are no elbows. Termination of the vent must be 2
feet above any obstruction within a 10 foot radius of vent pipe. Consult your gas utility or National Fuel Gas Code
if vent will have elbows or share venting with another appliance. The vent connector should have as much vertical
For installation on well systems, insure that your water pressure is between 30 - 50 psi.
Replacement Parts available from North American
Distributor
CONTROLLED ENERGY CORP.
GAS LINE SIZE
1/2"
10'
Liquid Propane
1/2"
NOT
RECOMMENDED
Minimum Vent Size* and Height
5 inches
rise as possible (minimum 12") before any horizontal run.
Water Pressure
INSTALLATION CHECKLIST
Natural Gas
3/4"
40'
5/8"
20'
1"
150'
3/4"
60'
Minimum Height**
6 feet**
7/8"
150'