Diamond Audio Technology CM351m Manual do Proprietário - Página 4

Procurar online ou descarregar pdf Manual do Proprietário para Altifalantes para automóvel Diamond Audio Technology CM351m. Diamond Audio Technology CM351m 10 páginas. Cm3 series convertible speaker systems

Imprimir página

Package Contents

-(2) Mid Bass Speakers

-(2) Mid Bass Speaker Grills

-(2) Mid Bass Speaker Gaskets

-(16) Mid Bass Mounting Screws

-(16) Speaker Mounting Screw Clips

-(2) Passive Crossovers (mounted on mid range speakers)

-(2) Crossover to Mid Range Mounting Screws

-(2) Separate Crossover Mounting Zip Ties

-(2) Crossover to Mid Bass Speaker Wire (component set up)

-(4) Spare Crossover Terminal Screws

-(2) Bridge Mount Tweeter Cups

-(8) Bridge Mounting Countersink Screws

-(2) 1" Aluminum Dome Tweeters (mounted in bridge)

-(2) Tweeter Bridge Cup Mounting Screws

-(2) Tweeter Flush Mount Cups

-(2) Tweeter Flush Mount Kits

-(2) Tweeter Flush Mount Screws

-(2) Tweeter Flush Mount Springs

-(2) Crossover to Tweeter Speaker Wire (component set up)

-(8) Female Wire Connectors (4 wide/4 narrow)

Tweeter Bridge Disassembly/Assembly

1. Remove tweeter bridge mounting screw from back of bridge cup.

2. Slide wire terminals apart so that tweeter leads hang freely.

3. Using a screw driver, gently pop tweeter out of cup through the screw

hole on the back of the cup.

1. To re-assemble, feed tweeter leads through the holes in the cup taking

note of polarity. (red dot indicates positive side)

2. Snap tweeter into cup by aligning the notches on the tweeter and cup.

(do not push on the center of the tweeter grill)

3. Gently tighten the tweeter bidge mounting screw into the tweeter

through the back of the cup. (do not over tighten)

4. Slide wire terminals together tacking in place for added security.

Bridge Disassembly/Assembly

(Disconnect)

(Connect)

Terminal Connections