Aquatec 02AD940 Manual de instruções - Página 7
Procurar online ou descarregar pdf Manual de instruções para Bomba de água Aquatec 02AD940. Aquatec 02AD940 8 páginas. Submersible filtration & waterfall pump
Imprimir página
TROUBLESHOOTING
Problem
Water Pump Not
Working
Water Pump is noisy
SPARE PARTS
(NOTE: THESE ARE THE MOST USED)
Kit Name
AQUAPRO AP3100DW /
AP6100DW Replacement Cage
AQUAPRO AP3100DW / AP6100DW
Impellor Cover Kit
AQUAPRO AP3100DW / AP6100DW
Impellor & Shaft
AQUAPRO AP3100DW /
AP6100DW Inlet / Outlet Kit
AQP 3100_6100DW Instructions.indd 7
FILTRATION & WATERFALL PUMP
Reason
No Power
Sponges and filter media
blocked with sludge
Impellor is blocked with
sludge or limescale
Running without sufficient water
Blocked Impellor chamber or ceramic
shaft is broken
Blockage in pump
Impellor & Shaft worn out
Impellor broken
Water valve closed on the outlet
Unit inlet is blocked or the water
pump inlet is blocked
Description
Slotted Pump Lid with Clips and Ring
Lid to Motor Rubber Spacer
Cage Inlet Cover
Slotted Pump Base
Impellor Cover & O Ring
Impellor Assembly
Inlet & Outlet O'Ring Set
Omni-directional hosetail with locking Nut
Threaded Adaptor and O'Ring
A Q U A T E C E Q U I P M E N T . C O M
AP3100DW / AP6100DW
Solution
Check that the plug is connected
and turned on
Clean the sponges and filters
Clean the Impellor as per
the instructions
Submerse the equipment underwater
then plug in. Refill if necessary.
Clean the Impellor. Check for ware.
Replace if necessary.
Clear the blockage
Replace Impellor & Shaft
Replace Impellor
Open the valve and allow
water to flow
Clear all blockages
Part No.
AP3100DW
1 / 2 / 10 / 11
6 / 4
5
7 / 8
AP6100DW
12AD060
12AD061
12AD062
12AD067
12AD068
12AD063
10/10/16 9:29 am