Aquatec PONDMAX PU7500 Manual de instruções - Página 7
Procurar online ou descarregar pdf Manual de instruções para Bomba de água Aquatec PONDMAX PU7500. Aquatec PONDMAX PU7500 8 páginas. Filtration & waterfall pumps
Imprimir páginaFILTRATION & WATERFALL PUMPS
TROUBLESHOOTING
Problem
Water Pump Not
Working
Water Pump is noisy
SPARE PARTS
(NOTE: THESE ARE THE MOST USED)
DESCRIPTION
IMPELLOR AND SHAFT
ELBOW BALL JOINT
INLET AND OUTLET HOSETAIL
PMAX PU Pumps Instructions.indd 7
Reason
No Power
Sponges and filter media
blocked with sludge
Impellor is blocked with
sludge or limescale
Running without sufficient water
Blocked Impellor chamber or ceramic
shaft is broken
Blockage in pump
Impellor & Shaft worn out
Impellor broken
Water valve closed on the outlet
Unit inlet is blocked or the water
pump inlet is blocked
PU3500
11PD111
11PD500
11PD400
W A T E R G A R D E N I N G T O T H E M A X
SUBMERSIBLE
Solution
Check that the plug is connected
and turned on
Clean the sponges and filters
Clean the Impellor as per
the instructions
Submerse the equipment underwater
then plug in. Refill if necessary.
Clean the Impellor. Check for ware.
Replace if necessary.
Clear the blockage
Replace Impellor & Shaft
Replace Impellor
Open the valve and allow
water to flow
Clear all blockages
PU5500
PU7500
PU10500
11PD112
11PD113
11PD500
11PD500
11PD400
11PD400
PU12500
11PD114
11PD115
11PD510
11PD510
11PD410
11PD410
26/7/17 1:03 pm