Aquatec orca Instruções de montagem - Página 2

Procurar online ou descarregar pdf Instruções de montagem para Ajuda na casa de banho Aquatec orca. Aquatec orca 4 páginas.

3. Lift up the lifting scissors.

4. Using a flat head screwdriver, remove the outer socket pins C, which connect the front part

of the lifting scissors with the seat plate, push them through to the inside and remove. For the

ORCA XL remove the retaining rings from the stainless steel pins, push them through to the

inside and remove.

5. Remove the seat plate backwards.

6. Insert the gliding shoes B on the lifting scissors into the track of the new seat plate. Secure

lifting scissors and seat plate through the holes with the new socket pins C from inside to

outside. For the ORCA XL use the previously disassembled stainless steel pins and secure with

the retaining rings.

7. Reattach the side flaps by inserting them simultaneously into the slots of the seat plate until all

clips are fully engaged.

Only for ORCA F:

8. Insert the wedge pieces D into the seat plate.

9. Substitute old bolt right E and bolt left F with new bolt right and bolt left.

10. Assemble the thrust washer clips G 180° turned.