Panasonic DMC-FT5 Manual de Instruções Básico - Página 12

Procurar online ou descarregar pdf Manual de Instruções Básico para Câmara digital Panasonic DMC-FT5. Panasonic DMC-FT5 40 páginas. Digital camera
Também para Panasonic DMC-FT5: Manual de ligação (2 páginas), Manual de Instruções Básico (36 páginas), Manual do Proprietário (43 páginas)

Panasonic DMC-FT5 Manual de Instruções Básico
∫ Handling of the camera
Waterproofing is not guaranteed if the unit is subject to an impact as a result of being hit or
dropped etc. If an impact to the camera occurs, it should be inspected (subject to a fee) by a
Panasonic to verify that the waterproofing is still effective.
When the camera is splashed with detergent, soap, hot spring, bath additive, sun oil, sun
screen, chemical, etc., wipe it off immediately.
Waterproof function of the camera is for sea water and fresh water only.
Any malfunction caused by customer misuse, or mishandling will not be covered by the
warranty.
The inside of this unit is not waterproof. Water leakage will cause malfunction.
Supplied accessories are not waterproof.
Card and battery are not waterproof. Do not handle with a wet hand. Also, do not insert wet
card or battery into the camera.
Do not leave the camera for a long period of time in places where temperature is very low
(at ski resorts or at high altitude etc.) or very high [above 40 oC (104 oF)], inside a car under
strong sunlight, close to a heater, on the beach, etc. Waterproof performance may be
degraded.
∫ About the [Precautions] demonstration display ([Requirements for

Underwater use])

[Precautions] is displayed when the power is turned on for the first time after purchase, with
the side door completely closed.
Please check beforehand to maintain the waterproof performance.
1
Press 2 to select [Yes], and press [MENU/SET].
It will automatically skip to the clock setting screen if [No] is selected before it starts.
2
Press 2/1 to select the picture.
Return to the previous screen
2:
View the next screen
1:
It can be forcefully ended by pressing [MENU/SET].
When it is forcefully ended while checking by turning the unit off or pressing [MENU/
SET], [Precautions] is displayed every time the power is turned on.
3
After the final screen (12/12), press [MENU/SET] to finish.
When [MENU/SET] is pressed after the final screen (12/12), [Precautions] is not
displayed from the next time the power is turned on.
This can also be viewed from [Precautions] in the [Setup] menu.
12
VQT4U09 (ENG)