HP 1910-16G Ficha de dados - Página 8

Procurar online ou descarregar pdf Ficha de dados para Interruptor HP 1910-16G. HP 1910-16G 16 páginas. 1910 switch series
Também para HP 1910-16G: Especificação rápida (43 páginas), Especificação rápida (44 páginas)

Imprimir página

HP 1910 Switch Series

Specifications (continued)

Ports

Physical characteristics

Weight

Memory and processor

Mounting

Performance

100 Mb Latency

1000 Mb Latency

Throughput

Routing/Switching capacity

Routing table size

MAC address table size

Environment

Operating temperature

Operating relative humidity

Nonoperating/Storage temperature

Nonoperating/Storage relative humidity 10% to 95%, noncondensing

Electrical characteristics

Frequency

Voltage

Maximum power rating

Notes

Safety

Emissions

Management

Notes

Services

HP 1910-24G Switch (JE006A)

24 RJ-45 auto-negotiating 10/100/1000 ports (IEEE

802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,

IEEE 802.3ab Type 1000BASE-T)

4 SFP 1000 Mbps ports

1 RJ-45 console port to access limited CLI port

Supports a maximum of 24 autosensing 10/100/1000

ports plus 4 1000BASE-X SFP ports, or a combination

17.4(w) x 6.3(d) x 1.7(h) in (44.2 x 16 x 4.32 cm) (1U

height)

6.8 lb (3.08 kg)

ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet

buffer size: 512 KB

Mounts in an EIA standard 19-inch telco rack or

equipment cabinet (hardware included)

< 5 µs

up to 41.7 Mpps (64-byte packets)

56 Gb/s

32 entries (IPv4), 32 entries (IPv6)

8192 entries

32°F to 113°F (0°C to 45°C)

10% to 90%, noncondensing

-40°F to 158°F (-40°C to 70°C)

50/60 Hz

100-240 VAC

31.5 W

Maximum power rating and maximum heat dissipation

are the worst-case theoretical maximum numbers

provided for planning the infrastructure with fully

loaded PoE (if equipped), 100% traffic, all ports plugged

in, and all modules populated.

UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No.

60950-1-03

FCC part 15 Class A; VCCI Class A; EN 55022 Class A;

CISPR 22 Class A; EN 55024; EN 61000-3-2 2000,

61000-3-3; ICES-003 Class A

IMC - Intelligent Management Center; limited

command-line interface; Web browser; SNMP Manager;

IEEE 802.3 Ethernet MIB

SFP ports and copper ports can work simultaneously,

independent of each other, to provide a total of 28

Gigabit Ethernet-capable ports.

3-year, 4-hour onsite, 13x5 coverage for hardware

(UV786E)

3-year, 4-hour onsite, 24x7 coverage for hardware

(UW485E)

HP 1910-16G Switch (JE005A)

16 RJ-45 auto-negotiating 10/100/1000 ports (IEEE

802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,

IEEE 802.3ab Type 1000BASE-T)

4 SFP 1000 Mbps ports

1 RJ-45 console port to access limited CLI port

Supports a maximum of 16 autosensing 10/100/1000

ports plus 4 1000BASE-X SFP ports, or a combination

17.4(w) x 6.3(d) x 1.7(h) in (44.2 x 16 x 4.32 cm) (1U

height)

6.8 lb (3.08 kg)

ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet

buffer size: 512 KB

Mounts in an EIA standard 19-inch telco rack or

equipment cabinet (hardware included)

< 5 µs

up to 29.8 Mpps (64-byte packets)

40 Gb/s

32 entries (IPv4), 32 entries (IPv6)

8192 entries

32°F to 113°F (0°C to 45°C)

10% to 90%, noncondensing

-40°F to 158°F (-40°C to 70°C)

10% to 95%, noncondensing

50/60 Hz

100-240 VAC

25.1 W

Maximum power rating and maximum heat dissipation

are the worst-case theoretical maximum numbers

provided for planning the infrastructure with fully

loaded PoE (if equipped), 100% traffic, all ports plugged

in, and all modules populated.

UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No.

60950-1-03

FCC part 15 Class A; VCCI Class A; EN 55022 Class A;

CISPR 22 Class A; EN 55024; EN 61000-3-2 2000,

61000-3-3; ICES-003 Class A

IMC - Intelligent Management Center; limited

command-line interface; Web browser; SNMP Manager;

IEEE 802.3 Ethernet MIB

SFP ports and copper ports can work simultaneously,

independent of each other, to provide a total of 20

Gigabit Ethernet-capable ports.

3-year, 4-hour onsite, 13x5 coverage for hardware

(UV786E)

3-year, 4-hour onsite, 24x7 coverage for hardware

(UW485E)

HP 1910-8G Switch (JG348A)

8 RJ-45 auto-negotiating 10/100/1000 ports (IEEE

802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,

IEEE 802.3ab Type 1000BASE-T)

1 SFP 1000 Mbps port

1 RJ-45 console port to access limited CLI port

Supports a maximum of 8 autosensing 10/100/1000

ports plus 1 1000BASE-X SFP ports, or a combination

8.27(w) x 8.27(d) x 1.72(h) in (21 x 21 x 4.36 cm) (1U

height)

4.41 lb (2 kg)

ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet

buffer size: 512 KB

Mounts in an EIA standard 19-inch telco rack or

equipment cabinet (hardware included)

< 5 µs

up to 13.4 Mpps (64-byte packets)

18 Gb/s

32 entries (IPv4), 32 entries (IPv6)

8192 entries

32°F to 113°F (0°C to 45°C)

10% to 90%, noncondensing

-40°F to 158°F (-40°C to 70°C)

10% to 95%, noncondensing

50/60 Hz

100-240 VAC

14.4 W

Maximum power rating and maximum heat dissipation

are the worst-case theoretical maximum numbers

provided for planning the infrastructure with fully

loaded PoE (if equipped), 100% traffic, all ports plugged

in, and all modules populated.

UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No.

60950-1-03

FCC part 15 Class A; VCCI Class A; EN 55022 Class A;

CISPR 22 Class A; EN 55024; EN 61000-3-2 2000,

61000-3-3; ICES-003 Class A

IMC - Intelligent Management Center; limited

command-line interface; Web browser; SNMP Manager;

IEEE 802.3 Ethernet MIB

SFP port and copper ports work simultaneously,

independent of each other, to provide a total of 9 Gigabit

Ethernet-capable ports.

Refer to the HP website at

www.hp.com/networking/services for details on the

service-level descriptions and product numbers. For

details about services and response times in your area,

please contact your local HP sales office.