HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive Manual de referência - Página 15

Procurar online ou descarregar pdf Manual de referência para Interruptor HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive. HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive 48 páginas. Storageworks modular smart array controller, cache, and battery replacement instructions
Também para HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive: Manual de Administração (40 páginas), Nota de lançamento (13 páginas), Instruções de início rápido (8 páginas), Nota de lançamento (8 páginas), Nota de lançamento (8 páginas), Manual de início rápido (7 páginas), Nota de lançamento (5 páginas), Nota de lançamento (5 páginas), Instruções de substituição (4 páginas)

Hot-Pluggability

Hot-pluggability allows components to be removed and replaced without

powering down the MSA1000.

The following MSA1000 hardware components are hot-pluggable:

Hard Drives—Failed drives in fault-tolerant configurations can be replaced

without interrupting system operation. Data on the failed drive is restored

automatically to the replacement drive online.

Power Supply/Blower Assembly—Redundant power supplies allow you to

remove one power supply and replace it without interrupting system operation.

The assembly includes one variable speed blower for each power supply. If one of

the blowers in the assembly fails, the other blower automatically operates at a

higher speed. A blower can be removed and replaced without removing the

assembly.

MSA1000 Controller—If your system has two controllers and one controller

fails, you can remove the failed controller. See the HP StorageWorks 1000

Modular Smart Array Maintenance and Service Guide for specific limitations.

Fibre Channel I/O Module—The Fibre Channel I/O Module is a single-port,

hot-pluggable 1-Gb/2-Gb Fibre Channel device that includes a 2-Gb Small Form

Factor Pluggable Transceiver (SFP) port. This module can be removed and

replaced with other interconnect options, such as the MSA SAN Switch 2/8 or the

MSA Hub 2/3.

MSA SAN Switch 2/8—The MSA SAN Switch 2/8 is an optional, hot-pluggable

I/O device designed to replace the single port Fibre Channel I/O Module that

comes standard with the MSA1000. This switch includes 8-ports, featuring 2 Gb/s

full duplex non-blocking performance on all ports. One port is internal to the

switch, leaving 7 available external ports.

MSA Hub 2/3—The MSA Hub 2/3 is an optional, hot-pluggable I/O device

designed to replace the single port Fibre Channel I/O Module that comes standard

with the MSA1000. This hub provides an inexpensive and easy way for a

clustered pair of servers to access the storage controller (using an arbitrated-loop

configuration), without having to buy an external hub or switch. Two SFP ports

are presented to the user, while a third, internal port accesses the controller.

HP StorageWorks 1000 Modular Smart Array Reference Guide

Introduction