HP 316095-B21 - StorageWorks Edge Switch 2/24 Nota de lançamento - Página 13

Procurar online ou descarregar pdf Nota de lançamento para Interruptor HP 316095-B21 - StorageWorks Edge Switch 2/24. HP 316095-B21 - StorageWorks Edge Switch 2/24 17 páginas. Edge switch release notes
Também para HP 316095-B21 - StorageWorks Edge Switch 2/24: Manual de atualização (9 páginas), Manual (41 páginas), Manual (40 páginas), Nota de lançamento (32 páginas), Nota de lançamento (27 páginas), Manual (26 páginas), Nota de lançamento (27 páginas), Nota de lançamento (25 páginas), Manual de instruções de instalação (24 páginas), Nota de lançamento (23 páginas), Nota de lançamento (23 páginas), Nota de lançamento (22 páginas), Nota de lançamento (23 páginas), Nota de lançamento (19 páginas), Nota de lançamento (19 páginas), Nota de lançamento (18 páginas), Manual de instruções (17 páginas), Instruções de atualização (16 páginas), Manual de instruções (16 páginas), Manual de instruções de instalação (16 páginas), Nota de lançamento (16 páginas), Nota de lançamento (17 páginas), Nota de lançamento (17 páginas), Nota de lançamento (11 páginas)

Backup to network

When conﬁguring backup to network using the Options dialog, the path for the backup output directory

must be in the folowing format:

\\Networkname\sharedfolder\subfolder

You must manually create a subfolder under a shared folder. HAFM backup does not recognize the

shared folder; only the subfolder.

For complete information for conﬁguring backup to a network drive, see the McDATA manual, EFC

Manager Software User Manual, part number 620-000170-060, Rev A.

Known issues

This section describes the known issues related to the 1U HAFM appliance and the HAFM software.

External Loop diagnostic may show incorrect result

If an External Loop test is run on a port and the required external loopback plug is not inserted into that

port, the test result should show the test as failed. However, it shows the test as incomplete. The Event Log

correctly shows the Loopback diagnostics port failure event.

Port fencing issues

The Alert bar may not count the correct number of ports blocked by fencing. More than one port may be

blocked, however, only one is displayed.

Zoning restrictions

When you activate zoning with the maximum number of zones (2048) in a zoneset, the HAFM

application may hang.

For Solaris, Linux, and AIX remote clients, a zoneset cannot be imported from a directory not containing

a DTD ﬁle.

Workaround

Do not activate a zoneset with 2048 or more zones.

For Solaris, Linux, and AIX remote clients, add the zoneset XML ﬁle and either remove the reference to the

DTD ﬁle or specify the full path to the DTD ﬁle.

Issue concerning HAFM remote client access to the HAFM appliance with dual LAN

conﬁguration

When using a single public LAN connection at the HAFM appliance for all Ethernet communications, the

single LAN connection operates correctly for the following functions:

•

Directors and Edge Switches that the HAFM appliance manages

•

Computers seeking remote client access to the HAFM appliance

•

SAN management applications such as HP OpenView SAN Area Manager

When using two LAN connections (public and private) at the HAFM appliance, Microsoft Windows

and HAFM determine the following:

Which LAN is to be the private LAN for communication between the HAFM appliance, and the

•

Directors and Edge Switches that the HAFM appliance manages?

•

Which LAN is to be the public LAN for communication between the HAFM appliance and

computers seeking remote client access to the HAFM appliance?

HA-Fabric Manager release notes