HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter Nota de lançamento - Página 3

Procurar online ou descarregar pdf Nota de lançamento para Interruptor HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter. HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter 8 páginas. Storageworks modular smart array controller, cache, and battery replacement instructions
Também para HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter: Manual de referência (48 páginas), Manual de Administração (40 páginas), Nota de lançamento (13 páginas), Instruções de início rápido (8 páginas), Nota de lançamento (8 páginas), Manual de início rápido (7 páginas), Nota de lançamento (5 páginas), Instruções de substituição (4 páginas)

Imprimir página
HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter Nota de lançamento
Description
The HP StorageWorks Simple SAN Connection Manager (SSCM) is a GUI-based management
application for basic management of storage area network (SAN) components, such as host bus
adapters (HBAs), switches, and storage arrays. The SSCM uses Microsoft's Virtual Disk Service (VDS)
to manage storage arrays. SSCM provides simplified storage management for VDS-compliant storage
devices in a single, integrated, wizard-based user interface.
Products and devices supported
SSCM supports the following products and devices:
•
HP StorageWorks 8/20q Fibre Channel Switch
•
HP StorageWorks EVA4x00/6x00/8x00 with XCS 6.110 or later
•
HP StorageWorks EVA4400
•
HP StorageWorks EVA6400/8400
•
HP StorageWorks MSA1x00 with firmware version 7.00 or later
•
HP StorageWorks MSA2000fc, HP StorageWorks MSA2000fc G2

Operating system support

SSCM supports the Microsoft Windows Server 2003 R2 x64/x86 operating system with Service Pack
2 and Microsoft hotfix QFE932755, available on the Microsoft website at
support.microsoft.com/kb/932755, or Microsoft Windows Server 2008 x64/x86 operating system
with Service Pack 1 or later.
Supported client operating systems include the following:
•
Microsoft Windows Server 2003 with SP2
•
Microsoft Windows Server 2008
•
SUSE Linux Enterprise Server (SLES) 9 and 10
•
Red Hat Enterprise Linux (RHEL) 4 and 5
•
VMware ESX 3.5
•
HP-UX 11.23, 11.31
Prerequisites
This section describes SSCM requirements.

System requirements

The server running your management software (the management station) must meet the following
minimum requirements to support SSCM and other HP software:
•
Microsoft Windows Server 2003 R2 x64/x86 with Service Pack 2 and Microsoft hotfix
QFE932755, available on the Microsoft website at http://support.microsoft.com/kb/932755,
or the Microsoft Windows Server 2008 x64/x86 operating system with Service Pack 1 or later
HP StorageWorks Simple SAN Connection Manager 2.20 release notes
http://
3