HP 376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch Manual de instalação - Página 19
Procurar online ou descarregar pdf Manual de instalação para Interruptor HP 376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch. HP 376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch 28 páginas. Fabric clustering system 24-port 4x fabric copper switch installation guide, march 2005
Também para HP 376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch: Livro Branco (13 páginas), Manual de implementação (9 páginas)
Imprimir página
2
ProLiant Linux Installation Overview &
Planning
Thank you for purchasing the HP 24-Port 4x Fabric Copper Switch
This guide provides an overview of how to install the HP 24-Port 4x Fabric Copper Switch. For more detailed
instructions, refer to the HP 24-Port 4x Fabric Copper Switch Hardware User Guide.
The latest switch firmware and user documentation are available online at: http://support.hp.com
1. Select Software and Driver downloads.
2. Enter your product name.
3. Click the double arrow.
NOTE
The latest copy of this document can be found at the above location.
This document contains the following sections that give installation information for the HP Fabric Clustering
System:
•
"About InfiniBand"
•
"Kit Contents"
•
"HP Fabric Clustering System 24-Port Switch"
•
"Install HP Fabric Clustering System Switches"
•
"Configuring Basic Connectivity"
•
"Attach Cables"
About InfiniBand
InfiniBand is an industry-standard high-speed, packet-based interconnect for node-to-node communications.
InfiniBand provides higher speed, lower network latency and uses less CPU than other industry standard
protocols (for example, Fibre Channel and Gigabit Ethernet). Instead of using a traditional bus-based
technology, InfiniBand is built around switched fabric architecture, providing the bandwidth necessary for
high speed data transfer. For more information on the InfiniBand standard see "http://www.infinibandta.org".
HP's release of this clustering solution delivers the performance and scalability required by the following:
•
Technical Computing Clusters supporting HP Message Passing Interface (MPI) based applications
Kit Contents
•
HP 24-Port Fabric Copper Switch
•
Switch Bezel
•
Serial management cable, DB-9, 10 ft (3m)
•
Two sets of rack rails (sliding rail and fixed rail assembled together)
•
Rack support bracket
•
Twelve T-10 Torx screws for attaching rails to switch
Chapter 2
19