HP 5120 SI Series Especificação - Página 13

Procurar online ou descarregar pdf Especificação para Interruptor HP 5120 SI Series. HP 5120 SI Series 33 páginas. 5120 si switch series
Também para HP 5120 SI Series: Manual de instalação (48 páginas)

Imprimir página
HP 5120 SI Series Especificação
QuickSpecs
Technical Specifications
Ports
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics Maximum heat
Safety
Emissions
24 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-
TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 fixed Gigabit Ethernet SFP ports
1 RJ-45 serial console port
Dimensions
Weight
128 MB flash, 128 MB SDRAM; packet buffer size: 0.5 MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
1000 Mb Latency
Throughput
Routing/Switching
capacity
Routing table size
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
dissipation
Voltage
DC Voltage
Maximum power rating
PoE power
Frequency
Notes
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J;
NOM; ROHS Compliance
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003 Class A; ANSI C63.4 2003;
ETSI EN 300 386 V1.3.3; AS/NZS CISPR22 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-
4-3; EN 61000-4-4; EN 61000-4-5; EN 61000-4-6; EN 61000-4-11; EN 61000-3-2:2006; EN 61000-3-
3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
DA - 13795 Worldwide — Version 12 — November 12, 2013
16.54(d) x 17.32(w) x 1.72(h) in. (42 x 44.0 x 4.36 cm) (1U height)
15.43 lb. (7 kg)
< 3 µs
41.7 million pps
56 Gbps
32 entries
32ºF to 113ºF (0ºC to 45ºC)
10% to 90%, noncondensing
-40ºF to 158ºF (-40ºC to 70ºC)
5% to 95%, noncondensing
539 BTU/hr (568.65 kJ/hr)
100-240 VAC
-52 to -55 VDC
832 W
720 W
50/60 Hz
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
PoE Power is the power supplied by the internal power supply, it is dependent
on the type and quantity of power supplies and may be supplemented with the
use of a External Power Supply (EPS).
With AC input, the Max power consumption is 523W (370W for PoE)
HP 5120 SI Switch Series
Page 13