HP 5120 SI Series Manual de instalação - Página 17
Procurar online ou descarregar pdf Manual de instalação para Interruptor HP 5120 SI Series. HP 5120 SI Series 48 páginas. 5120 si switch series
Também para HP 5120 SI Series: Especificação (33 páginas)
Imprimir página
Figure 14 Making a grounding cable connector
Figure 15 Connecting the grounding cable to a grounding strip
4
(1) Grounding post
(3) Grounding cable
Grounding the switch with a grounding conductor buried in
the earth ground
If the installation site has no grounding strips, but earth ground is available, hammer a 0.5 m (1.64 ft)
or longer angle iron or steel tube into the earth ground to serve as a grounding conductor.
The dimensions of the angle iron must be at least 50 × 50 × 5 mm (1.97 × 1.97 × 0.20 in). The steel
tube must be zinc-coated and its wall thickness must be at least 3.5 mm (0.14 in).
Weld the yellow-green grounding cable to the angel iron or steel tube and treat the joint for corrosion
protection.
(A)
1
3
3
4
(B)
2
(2) Grounding strip
(4) Hex nut
13
(A)
(B)