HP 5120 SI Series Manual de instalação - Página 24
Procurar online ou descarregar pdf Manual de instalação para Interruptor HP 5120 SI Series. HP 5120 SI Series 48 páginas. 5120 si switch series
Também para HP 5120 SI Series: Especificação (33 páginas)
Imprimir página
To set up an IRF fabric:
Step
1.
Plan IRF fabric setup
2.
Install IRF member
switches
3.
Connect the grounding
cable and power cords
4.
Power on the switches
5.
Configure basic IRF
settings
6.
Connect the physical
IRF ports
Planning IRF fabric setup
Planning IRF fabric size and the installation site
Choose switch models and identify the number of required IRF member switches, depending on the
user density and upstream bandwidth requirements. The switching capacity of an IRF fabric equals
the total switching capacities of all member switches.
NOTE:
As your business grows, you can plug a switch into an IRF fabric to increase the switching capacity
without any topology change or replacement.
Identifying the master switch and planning IRF member IDs
Determine which switch you want to use as the master for managing all member switches in the IRF
fabric. An IRF fabric has only one master switch. You configure and manage all member switches in
the IRF fabric at the command line interface of the master switch.
NOTE:
IRF member switches will automatically elect a master. You can affect the election result by
assigning a high member priority to the intended master switch. For more information about master
election, see the IRF configuration guide for your switch.
Prepare an IRF member ID assignment scheme. An IRF fabric uses member IDs to uniquely identify
and manage its members, and you must assign each IRF member switch a unique member ID.
Description
Plan the installation site and IRF fabric setup parameters:
Planning IRF fabric size and the installation site
Identifying the master switch and planning IRF member IDs
Planning IRF topology and connections
Identifying physical IRF ports on the member switches
Planning the cabling scheme
See "Installing the switch."
See
"Grounding the
switch" and "Connecting the power cord."
N/A
See
"Configuring basic IRF
See
"Connecting the physical IRF
All switches except the master switch automatically reboot, and the IRF
fabric is established.
20
settings."
ports."