HP 5120-24G EI TAA Ficha de dados - Página 7

Procurar online ou descarregar pdf Ficha de dados para Interruptor HP 5120-24G EI TAA. HP 5120-24G EI TAA 17 páginas. Hp 5120 ei switch series
Também para HP 5120-24G EI TAA: Manual de configuração (39 páginas)

Imprimir página
HP 5120-24G EI TAA Ficha de dados
Data sheet | HP 5120 EI Switch Series
HP 5120 EI Switch Series

Specifications

I/O ports and slots
Physical characteristics
Dimensions
Weight
Memory and processor
Mounting and enclosure
Performance
1000 Mb Latency
10 Gb/s Latency
Throughput
Routing/Switching capacity
Routing table size
Environment
Operating temperature
Operating relative humidity
Nonoperating/Storage
temperature
Nonoperating/Storage relative
humidity
Acoustic
Electrical characteristics
Frequency
Maximum heat dissipation
AC voltage
Maximum power rating
Idle power
HP 5120-48G EI Switch with
2 Interface Slots (JE069A)
48 RJ-45 autosensing 10/100/1000
ports; Media Type: Auto-MDIX; Duplex:
10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only (IEEE 802.3 Type
10BASE-T, IEEE 802.3u Type 100BASE-
TX, IEEE 802.3ab Type 1000BASE-T)
4 dual-personality ports; autosensing
10/100/1000BASE-T or SFP
1 RJ-45 serial console port
2 port expansion module slots
Supports a maximum of 48
autosensing 10/100/1000 ports
17.32(w) x 11.81(d) x 1.72(h) in.
(44 x 30 x 4.36 cm) (1U height)
11.02 lb (5 kg)
128 MB SDRAM, 16 MB flash; packet
buffer size: 4 MB
Mounts in an EIA standard 19-inch
Telco rack or equipment cabinet
(hardware included)
< 3.2 μs
< 2.6 μs
142.9 million pps
192 Gb/s
32 entries (IPv4)
32°F to 113°F (0°C to 45°C)
10% to 90%, noncondensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, noncondensing
ISO 7779
50/60 Hz
495 BTU/hr (522.23 kJ/hr)
100–240 VAC
145 W
55 W
HP 5120-48G EI Switch (JE067A)
48 RJ-45 autosensing 10/100/1000
ports; Media Type: Auto-MDIX; Duplex:
10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only (IEEE 802.3 Type
10BASE-T, IEEE 802.3u Type 100BASE-
TX, IEEE 802.3ab Type 1000BASE-T)
4 dual-personality ports; autosensing
10/100/1000BASE-T or SFP
1 RJ-45 serial console port
Supports a maximum of 48
autosensing 10/100/1000 ports
17.32(w) x 11.81(d) x 1.72(h) in.
(44 x 30 x 4.37 cm) (1U height)
11.02 lb (5 kg)
128 MB SRAM, 16 MB flash; packet
buffer size: 4 MB
Mounts in an EIA standard 19-inch
Telco rack or equipment cabinet
(hardware included)
< 3.2 μs
71.4 million pps
96 Gb/s
32 entries (IPv4)
32°F to 113°F (0°C to 45°C)
10% to 90%, noncondensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, noncondensing
ISO 7779
50/60 Hz
375 BTU/hr (395.63 kJ/hr)
100–240 VAC
110 W
54 W
HP 5120-24G EI Switch with
2 Interface Slots (JE068A)
24 RJ-45 autosensing 10/100/1000
ports; Duplex: 10BASE-T/100BASE-TX:
half or full; 1000BASE-T: full only (IEEE
802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type
1000BASE-T)
4 dual-personality ports; autosensing
10/100/1000BASE-T or SFP
1 RJ-45 serial console port
2 port expansion module slots
17.32(w) x 11.81(d) x 1.72(h) in.
(44 x 30 x 4.37 cm) (1U height)
9.92 lb (4.5 kg)
128 MB SDRAM, 16 MB flash; packet
buffer size: 2 M
Mounts in an EIA standard 19-inch
Telco rack or equipment cabinet
(hardware included)
< 3.2 μs
< 2.6 μs
107.2 million pps
144 Gb/s
32 entries (IPv4)
32°F to 113°F (0°C to 45°C)
10% to 90%, noncondensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, noncondensing
ISO 7779
50/60 Hz
362 BTU/hr (381.91 kJ/hr)
100–240 VAC
106 W
36 W
7