HP ProCurve 2810-24G Ficha de dados - Página 4
Procurar online ou descarregar pdf Ficha de dados para Interruptor HP ProCurve 2810-24G. HP ProCurve 2810-24G 6 páginas. Procurve switch 2810 series
Imprimir páginaHP ProCurve Switch 2810 Series
Specifications
Ports
Physical characteristics
Dimensions
Weight
Memory and processor
Processor
Mounting
Performance
Latency
Throughput
Switching capacity
MAC address table size
Environment
Operating temperature
Operating relative humidity
Non-operating/Storage temperature
Non-operating/Storage relative humidity
Altitude
Acoustic
Electrical characteristics
Maximum heat dissipation
Voltage
Current
Power consumption
Frequency
Notes
Safety
HP ProCurve Switch 2810-24G (J9021A)
20 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T,
IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T);
Media Type: Auto-MDIX; Duplex: 10Base-T/100Base-TX: half or full;
1000Base-T: full only
1 RJ-45 serial console port
4 dual-personality ports; each port can be used as either an RJ-45
10/100/1000 port (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type
100Base-TX, IEEE 802.3ab 1000Base-T Gigabit Ethernet) or an
open mini-GBIC slot (for use with mini-GBIC transceivers)
12.7(d) x 17.4(w) x 1.7(h) in. (32.26 x 44.2 x 4.32 cm) (1U height)
7.21 lb. (3.27 kg)
MIPS @ 264 MHz, 16 MB flash, 64 MB SDRAM; packet buffer size:
0.75 MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet
(hardware included); horizontal surface mounting only
< 5.6 µs (FIFO 64-byte packets)
up to 35.7 million pps
48 Gbps
8000 entries
32ºF to 113ºF (0ºC to 45ºC)
15% to 95% @ 104ºF (40ºC), non-condensing
-40ºF to 158ºF (-40ºC to 70ºC)
15% to 95% @ 149ºF (65ºC), non-condensing
up to 10000 ft. (3 km)
Power: 40.3 dB
164 BTU/hr (173 kJ/hr)
100-127 / 200-240 VAC
1.0 A
48 W
50 / 60 Hz
Maximum power rating is the worst-case theoretical maximum power
number with fully loaded PoE, 100% traffic, all ports plugged in, and
all modules populated.
HP ProCurve Switch 2810-48G (J9022A)
44 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T,
IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T);
Media Type: Auto-MDIX; Duplex: 10Base-T/100Base-TX: half or full;
1000Base-T: full only
1 RJ-45 serial console port
4 dual-personality ports; each port can be used as either an RJ-45
10/100/1000 port (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type
100Base-TX, IEEE 802.3ab 1000Base-T Gigabit Ethernet) or an
open mini-GBIC slot (for use with mini-GBIC transceivers)
12.7(d) x 17.4(w) x 1.7(h) in. (32.26 x 44.2 x 4.32 cm) (1U height)
8.6 lb. (3.9 kg)
MIPS @ 264 MHz, 16 MB flash, 64 MB SDRAM; packet buffer size:
1.5 MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet
(hardware included); horizontal surface mounting only
< 5.4 µs (FIFO 64-byte packets)
up to 71.4 million pps
96 Gbps
8000 entries
32ºF to 113ºF (0ºC to 45ºC)
15% to 95% @ 104ºF (40ºC), non-condensing
-40ºF to 158ºF (-40ºC to 70ºC)
15% to 95% @ 149ºF (65ºC), non-condensing
up to 10000 ft. (3 km)
Power: 40.5 dB
341 BTU/hr (360 kJ/hr)
100-127 / 200-240 VAC
1.5 A
92 W
50 / 60 Hz
Maximum power rating is the worst-case theoretical maximum power
number with fully loaded PoE, 100% traffic, all ports plugged in, and
all modules populated.
4