HP ProCurve J8765A Manual de instalação - Página 24

Procurar online ou descarregar pdf Manual de instalação para Interruptor HP ProCurve J8765A. HP ProCurve J8765A 48 páginas. Hp procurve switch vl modules
Também para HP ProCurve J8765A: Especificações (22 páginas)

Imprimir página

ProCurve Switch vl Modules

Installing the Modules

Default Port Configuration

If the slot in which you installed the module was empty the last time the switch

was either rebooted or reset (or the power to the switch was cycled), then the

module will use preconfigured default parameter values that will work for

most networks.

The default port configurations for connection parameters are:

Ports Enabled: Yes

■

Mode:

•

10/100-TX vl Module: Auto — The port auto negotiates speed (10 or

100 Mbps), communication mode (half or full duplex), and MDI or

MDI-X port operation. If you configure the port to one of the fixed 10

or 100 Mbps modes, the port will then operate only as an MDI-X port.

All Gig-T vl Modules: Auto — The port auto negotiates speed (10,

•

100 or 1000 Mbps), communication mode (half or full duplex), and

MDI or MDI-X port operation. If you configure the port to one of the

fixed 10 or 100 Mbps modes, the port will then operate only as an MDI-

X port.

•

Gigabit-SX, Gigabit-LX, Gigabit-LH, 1000Base-T, and SFP

ports in mini-GBIC and the Gig-T + 4-port SFP vl Modules: Auto

— The port always operates at 1000 Mbps and full duplex. The setting

is Auto for best link establishment with other devices.

100-FX MTRJ vl Modules: 100FDX — The port operates at 100 Mbps

•

and full-duplex.

Flow Control: Disabled

■

Advanced features — Spanning Tree, Trunking, Meshing, VLANs, IGMP,

■

LACP, Routing, Class of Service, Security, and so forth: all Disabled

If the default port configuration listed above is not correct for your network,

configure the port(s) in the module by using the switch console or the web

browser interface. For more information, see the Management and

Configuration Guide for your switch, available on the ProCurve Web site

www.procurve.com, and the online Help provided in the console and web

browser interfaces.