HP storageworks 2/32 Nota de lançamento - Página 8
Procurar online ou descarregar pdf Nota de lançamento para Interruptor HP storageworks 2/32. HP storageworks 2/32 32 páginas. Hp storageworks m-series infrastructure
Também para HP storageworks 2/32: Especificações técnicas (12 páginas)
Imprimir página
SAN Switch 2/32 Firmware Version 4.0.2b Updates
firmwarerestore
Use this admin level command to delete a new firmware version download from flash
memory and restore the previous version of the firmware from the secondary partition.
This can only be performed if the firmwaredownload was previously executed
with the auto-commit flag disabled.
firmwaredownloadstatus
Use this admin level command to display the status of a firmware download. This
command displays an event log that records the progress and status of the current
firmwaredownload command. The event log is created by the current
firmwaredownload command and is retained until another
firmwaredownload command is issued. A timestamp is associated with each
event.
firmwareshow
Use this user level command to display the firmware version information for the
primary and secondary partitions of flash memory on a switch.
Error Log Enhancements
The Error Log subsystem now retains a maximum of 1,536 messages in RAM, that is,
a total of 256 messages for each error message level (Panic, Critical, Error, Warning,
Info, and Debug). In addition, important messages are stored in a separate persistent
error log to guarantee that they are not lost in case of power outage or system reboot.
IMPORTANT: The enhancement prevents messages of lesser severity from overwriting
messages of greater severity. For example, Warning messages cannot overwrite Error, Critical
or Panic messages.
Error log updates include:
•
The error log subsystem supports persistent logging. Each switch integrates its
own persistent log.
•
The persistent log is preserved across power cycles and system reboots.
•
The persistent log has a default capacity to store 1,024 error log entries.
•
The persistent log can be resized at run time without having to reboot the switch
or the system.
•
The persistent log is configurable to a maximum of 2,048 entries. The persistent
error log can be resized to between 1,024 and 2,048 entries.
8
SAN switch 2/32, version 4.0.2b release notes