HP StorageWorks 2/32 - SAN Switch Nota de lançamento - Página 6

Procurar online ou descarregar pdf Nota de lançamento para Interruptor HP StorageWorks 2/32 - SAN Switch. HP StorageWorks 2/32 - SAN Switch 32 páginas. Fabric manager version 3.0.x release notes
Também para HP StorageWorks 2/32 - SAN Switch: Manual de instruções de instalação (20 páginas), Manual do utilizador (22 páginas), Notas de versão do firmware (14 páginas), Nota de lançamento (48 páginas), Manual de instruções de instalação (6 páginas), Nota de lançamento (14 páginas), Nota de lançamento (4 páginas)

SAN Switch 2/32 Hardware Updates

6. Clear the switch of all zoning information by running the following set of

commands:

cfgdisable

cfgclear

cfgsave

7. Connect the switch to the fabric through an ISL cable. Once the switch is

connected to the fabric, the zone configuration information for the fabric will

automatically copy to the switch.

8. Clear the Management server Platform Database from the switch with the

msPlClearDB command.

SAN Switch 2/32 Hardware Updates

The following section lists hardware updates for the SAN Switch 2/32.

Important Information Regarding the HP System/e Rack

Mounting Hardware

HP highly recommends installing the switch in the optional System/e Rack using only

the hardware supplied with the rack.

For example, when installing the two inner rails on either side of the switch, you must

use the six #8-32 x 5/16 Phillips pan-head screws, and #8 flat washers as specified in

the hp StorageWorks SAN Switch 2/32 Installation Guide. The #8 flat washer shortens

the #8-32 x 5/16 Phillips pan-head screw so that it does not interfere with the internal

components of the switch.

IMPORTANT: Using longer than recommended screws to install your switch into the HP

System/e Rack Kit will result in physical damage to the switch motherboard.

SAN switch 2/32, version 4.0.2b release notes