HP StorageWorks 8/40 - SAN Switch Nota de lançamento - Página 20
Procurar online ou descarregar pdf Nota de lançamento para Interruptor HP StorageWorks 8/40 - SAN Switch. HP StorageWorks 8/40 - SAN Switch 43 páginas. Hp storageworks fabric os 6.1.2b release notes (5697-0351, march 2010)
Também para HP StorageWorks 8/40 - SAN Switch: Nota de lançamento (30 páginas), Nota de lançamento (29 páginas), Nota de lançamento (32 páginas)
Imprimir página
Fabric OS 6.2.0b does not support concurrent FC Routing (EX_Ports) and TopTalkers features Upgrading
to Fabric OS 6.2.0b requires that one of these features be disabled first.
Firmware upgrade instructions
IMPORTANT:
HP strongly recommends that users upgrade to Fabric OS 6.2.0b as soon as possible. Upgrading to
Fabric OS 6.2.0b is allowed only from Fabric OS 6.1.x. See
8 for additional guidelines.
NOTE:
With the introduction of Fabric OS 6.1.1, certain features and functions were removed from Web
Tools (resident in the firmware) and migrated to the Data Center Fabric Manager (DCFM) management
application. This has been carried forward to Fabric OS 6.2.x. HP recommends that before upgrading
to Fabric OS 6.2.x or later, if you are not running DCFM on your fabric, you review the
functionality Moved to
to your fabric.
To access the latest Fabric OS 6.2.0b firmware, configuration files, and MIB files, see the HP website:
http://www.hp.com/support/downloads
At the website:
1.
User Storage, select Storage Networking.
2.
Select the link for the appropriate switch, select your product, and then select Cross operating
system (BIOS, firmware, Diagnostics, etc.)
3.
Select Firmware (HP StorageWorks Fabric OS release notes 13).
4.
Select V6.x Firmware for HP StorageWorks B-Series Fibre Channel Switches for Fabric OS 6.2.0b:
To download the firmware, select Download.
To read the release notes, select the Release Notes tab.
Scalability
Refer to the HP SAN Design Guide, available on http://www.hp.com for specifics on supported
scalability.
FICON support
The HP StorageWorks DC04 SAN Director Switch is not supported for FICON Cascading in
interopmode 2 or 3 for use in mixed fabrics with M-EOS platforms.
NOTE:
For information about specific versions of Fabric OS support for FICON, see the B-series FICON
Connectivity Stream.
20
DCFM" on page 25 and note what has changed in order to assess the impact
Update
recommendations" on page
Web Tools