HP StorageWorks 8B - FC Entry Switch Manual de instalação - Página 10

Procurar online ou descarregar pdf Manual de instalação para Interruptor HP StorageWorks 8B - FC Entry Switch. HP StorageWorks 8B - FC Entry Switch 14 páginas. Fabric os release notes version 3.0.1b
Também para HP StorageWorks 8B - FC Entry Switch: Manual de atualização (9 páginas), Manual de instruções de instalação (20 páginas), Manual do utilizador (22 páginas), Notas de versão do firmware (14 páginas), Nota de lançamento (26 páginas), Manual (50 páginas), Manual do utilizador (44 páginas), Manual do utilizador (44 páginas), Manual do utilizador (38 páginas), Manual do utilizador (38 páginas), Manual do utilizador (37 páginas), Manual do utilizador (30 páginas), Nota de lançamento (16 páginas)

Installing the Switch in a Rack Using the SAN Switch Universal Rack Mount Kit

6. For the SAN Switch 2/32 and SAN Switch 2/16, perform

Note:

2/16, and SAN Switch 2/8. The mounting holes in the inner rails are marked with 32,

16, and 8. Use the appropriately labeled mounting holes when installing the inner rails

on a switch. For example, to install the inner rails on the SAN Switch 2/32, use the

mounting holes labeled with 32.

When viewing a rack from the front, the left rails are used in the left side of the rack and

the right rails are used in the right side of the rack. The rails must match up—right inner

with right outer and left inner with left outer. Note that the SAN switch mounts in the

rack with its front, the port side, facing the back of the rack. The rear of the switch, the

AC side, faces the front of the rack.

Addendum Pg

Switch 2/8, perform

Caution:

Do not use any other screws other than the fourteen that are

provided. Use of any longer lengths can cause damage to internal components

The inner rails work for all three SAN switches—SAN Switch 2/32, SAN Switch

step

HP StorageWorks SAN Switch 2/8|16|32 Installation Guide

step

a. For the SAN