HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Manual de referência - Página 19

Procurar online ou descarregar pdf Manual de referência para Interruptor HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM. HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 46 páginas. 1u rackmount tape enclosure
Também para HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM: Instruções de instalação (2 páginas), Manual de instruções de instalação (20 páginas), Manual de instalação (14 páginas), Nota de lançamento (14 páginas), Instruções de instalação (2 páginas)

Rack Installation

The rack rails supplied with the 1U rackmount tape enclosure can be used to install the unit in racks

that have round, square, or threaded holes in the vertical mounting bars. The rails will fit racks with

23 - 34 inches (58 - 86 cm) separation between the front and rear vertical mounting bars. The rails

are identical and may be mounted on either the left or the right side.

Figure 14

Rail mounting kit components

Outer rack rails

Inner component rails

Cable support clips

Fastners

If you are installing the tape enclosure in a rack with unmarked holes in the vertical mounting bars

the following items will make the rack installation easier:

•

Pencil

•

Tape measure

If you are installing the tape enclosure in a rack with threaded holes in the vertical mounting bars

you will need the following tool:

•

3/16" (5mm) flat-blade screwdriver

15121

1U Rackmount Tape Enclosure Reference Guide