HP StorageWorks Fabric OS 4.4.0f Nota de lançamento - Página 47

Procurar online ou descarregar pdf Nota de lançamento para Interruptor HP StorageWorks Fabric OS 4.4.0f. HP StorageWorks Fabric OS 4.4.0f 48 páginas. Hp storageworks fabric os 4.4.0f release notes (aa-rw89a-te, october 2005)

Imprimir página

Closed issues from Fabric OS 4.4.0f

Table 10

lists issues resolved with the release of Fabric OS version 4.4.0f.

Table 10

Fabric OS 4.4.0f closed issues summary

Closed defect

Issue: When "Long Distance Fabric"

parameter is configured on 1 Gb

StorageWorks 8 and 16 switches to

include a SAN Switch 4/32 in the

fabric, ISL ports on the older switches

get link timeouts.

1 Gb StorageWorks 8 and 16

switches running FOS 2.x must set the

Long Distance Fabric parameter ON

when connected to a SAN Switch

4/32. This results in a Continuous

Link Timeout.

Issue: DCC policy is not enforced

properly after

failover/reboot/fastboot.

Symptom: DCC_POLICY is not

enforced if only 1 CP is rebooted or

fastbooted during either cold or

warm recovery. Rebooting or

fastbooting both CPs does not show

any error.

Issue: When a disk drive on a loop is

replaced, the Nameserver still shows

the WWN of the old drive.

Symptom: During JBOD drive

replacement testing, the new drive

WWN information is not listed in the

switch name server table. The

portloginshow command

displays the correct WWN of the

drive, but the old wwn shows up in

the name server table.

Issue: Switch does not pass traffic in

interopmode with Window host if

there is a zone change performed

without a switch reboot.

Symptom: FC trace showed FOS 4.4

switch rejecting a GPN_ID with the

error port ID not in register.

Status

Workaround: Do not use Long

Distance Fabric parameter. Use

portcfglongdistance to set

Long distance link on individual

port.

Workaround: Issue a subsequent

secpolicyactivate after the

reboot/fastboot completes to

reestablish the DCC policy.

Workaround: After swapping the

device, portdisable and

portenable will correct the

portwwn in the NS database.

Workaround: Switch reboot.

Fabric OS 4.4.0f release notes