HP StorageWorks SAN Switch 2/8 EL Nota de lançamento - Página 13
Procurar online ou descarregar pdf Nota de lançamento para Interruptor HP StorageWorks SAN Switch 2/8 EL. HP StorageWorks SAN Switch 2/8 EL 26 páginas. San switch 2/8 version 3.0.2k release notes
Também para HP StorageWorks SAN Switch 2/8 EL: Nota de lançamento (16 páginas)
Imprimir página
Configuration File
HP supplies the following configuration file, included on the CD:
The HPSAN208.doc configuration file is used with the SAN Switch 2/8. This file
includes switch and Fabric Watch custom parameters/profiles. All parameters can
be downloaded to a switch when logged on as the "admin" user. HPSAN208.doc is
also available on the HP website listed in the
Software v3.1 CD
Note:
those parameters within this file. It will not change any other parameter on the switch
that may have been changed at the customer site. Remember that all switches in a
fabric must have the same configuration settings.
HP Recommendations
HP always recommends redundant fabrics and multi-pathing software for
uptime-sensitive environments. Examples of scenarios protected by redundant
fabrics include, but are not limited to:
■
■
■
■
■
■
HP recommends strongly against using drivers that bind by PID. There are several
routine maintenance procedures that may result in a device receiving a new PID;
the core PID format update is just one example of such a procedure. Examples
include, but are not limited to:
■
■
■
SAN Switch 2/8 Version 3.1.x Release Notes
SECFAB31\firmware\HPSAN208.doc
section of these Release Notes.
Performing a configdownload with these files only appends or changes
Add/Move/Change operations for devices or switches
Changing the core PID format
Changing any other fabric-wide parameters (for example, ED_TOV)
Erroneous zoning changes/user error
Major upgrades/changes to fabric architecture
Physical disasters, for example, water pipe breaks above fabric A rack
Changing Compatibility Mode settings
Changing switch domain IDs
Merging fabrics
HP Recommendations
HP StorageWorks SAN Switch
13