HP StorageWorks XP12000 Manual de configuração - Página 15

Connecting the disk array

The HP service representative connects the disk array to the host by:

Verifying operational status of the disk array channel adapters, LDEVs, and paths.

Connecting the Fibre Channel cables between the disk array and the fabric switch or host.

Verifying the ready status of the disk array and peripherals.

To recognize the new device(s), restart the Linux server as follows:

Power on the display of the Linux server.

Power on all devices other than the Linux server.

Confirm ready status of all devices.

Power on the Linux server.

Verify that the FCA driver is installed using the lsmod command.

View the device information in the /proc/scsi/scsi file.

Example

#cat /proc/scsi/scsiAttached devices:

Host: scsi0 Channel: 00 Id: 00 Lun: 00

Vendor: HP

Type:

Host: scsi0 Channel: 00 Id: 00 Lun: 01

Vendor: HP

Type:

Host: scsi0 Channel: 00 Id: 00 Lun: 02

Vendor: HP

Type:

Host: scsi0 Channel: 00 Id: 00 Lun: 03

Vendor: HP

Type:

Model: OPEN-9

Direct-Access

Model: OPEN-9

Direct-Access

Model: OPEN-9

Direct-Access

Model: OPEN-9

Direct-Access

Rev: 2105

ANSI SCSI revision: 02

Rev: 2105

ANSI SCSI revision: 02

Rev: 2105

ANSI SCSI revision: 02

Rev: 2105

ANSI SCSI revision: 02

XP Disk Array Configuration Guide for Linux