HP StorageWorks XP12000 Manual de configuração - Página 11

CAUTION:

The correct host mode must be set for all new installations (newly connected ports) to Windows hosts.

Do not select a mode other than 2C or 0C. Changing a host mode after the host has been connected

is disruptive and requires the server to be rebooted.

When a new host group is added, additional host group modes (options) may be configured. The

storage administrator must verify if an additional host group mode is required for the host group.

The following host group modes (options) are available for Windows:

Table 3 Host group modes (options)

Host Group

Function

Mode

Veritas DBE+RAC Database Edition/Advanced Cluster for Real

(Windows

Application Clusters or Veritas Cluster Server 4.0 with I/O fencing

2003 only)

is used.

Parameter Setting Failure for TPRLO

When using the Emulex FCA in the Windows environment, the

parameter setting for TPRLO failed. After receiving TPRLO and

FCP_CMD, respectively. PRLO will respond when HostMode=0x0C/

0x2C and HostModeOption=0x06. (MAIN Ver.50-03-14-00/00

and later)

CAUTION:

Changing host group modes for ports where servers are already installed and configured is disruptive

and requires the server to be rebooted.

XP Disk Array Configuration Guide for Windows

Default

Inactive