HP surestore fc 2Gb entry switch 8B Manual - Página 12

Procurar online ou descarregar pdf Manual para Interruptor HP surestore fc 2Gb entry switch 8B. HP surestore fc 2Gb entry switch 8B 50 páginas. Fabric os procedures guide (version 3.0)

Imprimir página

Setting the Initial Configuration

Enabling Licensed Features

Licensed features are already loaded onto the switch firmware, but must be enabled with a license

key. Once you have purchased these features you are provided with a key to unlock the feature.

To enable a licensed feature:

At the command line enter the following command:

licenseAdd "aaaBbbCcc"

where aaaBbbCcc is the license key for a particular feature.

Note:

Displaying the Installed Feature Licenses

To display what features have been enabled on a switch:

At the command line enter the following command:

licenseShow

This command displays the license keys that have been entered for the switch and the features

enabled by those licenses.

Changing the Admin Password and User ID

For security reasons, the first time you log into the Fabric OS you are requested to change the

admin user ID and system password.

To change the Admin user ID and password:

At the command line enter the following command:

Password "admin"

An interactive session is opened and you are prompted for configuration values.

At the New username prompt, enter a new name for the admin user. You can change the name

of the admin user without changing the password. Press enter to leave the name as is.

At the Old Password prompt, enter the old password.

At the New password prompt, enter the new password. The new password must be from 8 to

40 characters in length.

At the Re-enter new password prompt, enter the new password exactly as entered to the

previous prompt.

Press the enter key to commit the configuration to the firmware.

1-2

You must enter a license key for each feature to activate. License keys are case sensitive.

Fabric OS Procedures Guide