HP XP20000/XP24000 Manual de configuração - Página 18

Procurar online ou descarregar pdf Manual de configuração para Interruptor HP XP20000/XP24000. HP XP20000/XP24000 46 páginas. Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
Também para HP XP20000/XP24000: Nota de lançamento (13 páginas), Manual de integração (29 páginas), Nota de lançamento (4 páginas), Manual do Administrador (50 páginas), Manual de configuração (42 páginas), Manual de configuração (40 páginas), Manual de configuração (40 páginas), Manual de configuração (36 páginas), Manual de configuração (36 páginas), Manual de configuração (30 páginas), Manual de configuração (36 páginas), Nota de lançamento (5 páginas), Manual de configuração (46 páginas), Manual de referência (46 páginas), Manual de configuração (40 páginas), Manual de configuração (44 páginas), Manual de configuração (38 páginas), Manual de configuração (34 páginas), Manual de configuração (30 páginas), Manual de configuração (30 páginas)

HP XP20000/XP24000 Manual de configuração
Figure 3 Multi-cluster environment
Within the Storage Area Network (SAN), the clusters must be homogeneous (all the same operating
system). Heterogeneous (mixed operating systems) clusters are not allowed. How you configure LUN
security and fabric zoning depends on the SAN configuration.

Fabric zoning and LUN security for multiple operating systems

You can connect multiple clusters with multiple operating systems to the same switch and fabric using
appropriate zoning and LUN security. Note:
Storage port zones may overlap if more than one operating system needs to share an array port.
Heterogeneous operating systems may share an XP array port if you set the appropriate host group
and mode. All others must connect to a dedicated XP array port.
Use Secure Manager for LUN isolation when multiple hosts connect through a shared array port.
Secure Manager provides LUN security by allowing you to restrict which LUNs each host can
access.
Table 3 SAN fabric zoning and LUN security settings
Environment
Standalone SAN
(non-clustered)
Clustered SAN
Multi-Cluster SAN

Connecting the disk array to the NetWare server

The HP service representative connects the disk array to the host by:
1.
Verifying operational status of the disk array channel adapters, LDEVs, and paths.
2.
Connecting the Fibre Channel cables between the disk array and the fabric switch or host.
3.
Verifying the ready status of the disk array and peripherals.
18
Installing and configuring Novell Netware for the XP disk array
OS Mix
homogeneous (a single OS type
present in the SAN)
heterogeneous (more than one OS
type present in the SAN)
Fabric Zoning
LUN Security
Not required
Must be used when
multiple hosts or cluster
nodes connect through
Required
a shared port