Diamond Products CC1600 Manual do operador - Página 9

Procurar online ou descarregar pdf Manual do operador para Serra Diamond Products CC1600. Diamond Products CC1600 16 páginas. Wall saw

Imprimir página

MOUNTING A FLUSH CUT BLADE

Always use a flush cut blade guard when flush cutting and a standard style blade guard
1.
Remove the standard flange from the blade shaft.
2.
Mount the flush cut flange to the blade shaft.
3.
Place the blade on the flush cut flange. Be sure the blade is mounted correctly.
The "tails" behind the diamonds should point opposite the blade rotation.
Reversing the blade will cause higher blade wear.
4.
Fasten the blade to the flange with six 5/16-18 x 1" flat head socket cap screws.
NOTE
for all other cutting.