Diamond Products CB515 Manual do operador - Página 8

Procurar online ou descarregar pdf Manual do operador para Perfurar Diamond Products CB515. Diamond Products CB515 17 páginas. Diamond core drilling motor

Imprimir página

It is equipped with a PRCD interrupter (portable residual current device) which must be used at all times. It is

equipped with a two speed mechanical gearbox for different core drill size ranges and features a mechanical

safety clutch. The motor has electronics for soft start, overload protection and thermal (overheating)

protection.

ELECTRICAL CONNECTION

The network voltage must conform to the voltage indicated on the tool name plate.

Under no circumstances should the tool be used when the power supply cable is damaged. A damaged

cable must be replaced immediately by an authorized Customer Service Center. Do not try to repair the

damaged cable yourself. The use of damaged power cables can lead to an electric shock.

WARNING:

This machine is equipped with a Portable Residual Current

Device (PRCD) also known as a Ground Fault Circuit Interrupter

(GFCI). Always use this device whenever using the machine to

reduce the risk of shock hazards. Test and reset the PRCD

device before each use. Press the "Test" button to test. Press the

"Reset" button to energize the circuit.

WARNING!: 110V UK machines are not equipped with a PRCD portable residual current device or GFCI

ground fault circuit interrupter. The machine must always be used with an isolating transformer for

protection in case an electrical fault should occur.

Use an RCD in a separate control box with one or more socket outlets in accordance with EN

60309-2 with the earthing contact position 1 h.

ASSEMBLY

Mount the handle clamp of the side handle onto the gearbox neck. Position the side handle perpendicular

to the main handle. Use the lock screw to tighten the clamp.

Thread the water supply assy. Into the hole in the bottom of gearbox and tighten with a wrench.

LIST OF CONTENTS

•

Diamond core drilling machine.

•

Side handle assembly

•

Water feed assembly

•

Wrench

OPERATING INSTRUCTIONS

1) MOUNTING THE CORE BIT

CAUTION: Ensure that the threads of the spindle and the core bit match. Attempting to mount

mismatched threads will result in damage to both threads.

Test Button

Reset Button

On Lamp