Panasonic ETJPC200WU Manual de instruções de instalação - Página 17

Procurar online ou descarregar pdf Manual de instruções de instalação para Projetor Panasonic ETJPC200WU. Panasonic ETJPC200WU 30 páginas.

Installation (continued)

When the hanging bolt installation location is a wooden beam

Spring washer

Flat washer

Ceiling board

Spring washer

Protrudes 20 mm (25/32") to 30 mm (1-3/16")*

ceiling surface.

*1 27 mm (1-1/16") to 30 mm (1-3/16") for double nuts

1) Drill mounting holes in reference to "Mounting hole dimensions" ( page 12).

z Drill two through holes in the ceiling beam for the hanging bolts.

z Drill two through holes in the ceiling board for the hanging bolts (M10).

2) Attach the two hanging bolts.

z Securely fix the two hanging bolts to the ceiling beam.

z If the place for fixing the hanging bolts is not strong enough, do give consideration to the safety factor and

provide sufficient reinforcement.

3) Attach the attachment plate to the hanging bolts.

z The ends of hanging bolts at the attachment plate side should protrude by approx. 5 mm (3/16") from the

hexagonal nuts.

z Make sure the distance from the surface of the attachment plate to the end of the hanging bolts is within 30

mm (1-3/16"). If the distance is too long, the projector mount bracket will not be able to be attached.

z Be sure to use commercially available flat washers and spring washers to install the attachment plate.

Attention

z Tighten the hexagonal nuts fixing the ceiling board and attachment plate together while considering the strength

of the ceiling board material. If the ceiling board material is of low strength, the ceiling board may be damaged

if the nuts are tightened to the specified torque. In this case, also take measures such as applying double nuts

or screw lock to prevent loosening of the hexagonal nuts.

Note

z When mounting the attachment plate to the hanging bolts, there is no need to install the falling prevention wire

to the ceiling.

Hexagonal nuts

Beam

Hanging bolt

Hexagonal nuts

Attachment plate

from the

Spring washer

Hexagonal nut

Flat washer

Hanging bolt

Flat washer

Hexagonal nut

Spring washer

ENGLISH - 17