Panasonic PLC-XP40 Manual do Proprietário - Página 22
Procurar online ou descarregar pdf Manual do Proprietário para Projetor Panasonic PLC-XP40. Panasonic PLC-XP40 44 páginas. Multimedia projector
Imprimir página
COMPUTER INPUT
DIRECT OPERATION
Choose Computer by pressing INPUT button on Top Control or on
Remote Control Unit.
If projector cannot reproduce proper image, select correct input source
through MENU OPERATION (see below).
MENU OPERATION
Press MENU button and ON-SCREEN MENU will appear. Press
1
POINT LEFT/RIGHT buttons to select Input and press SELECT
button. Another dialog box INPUT SELECT Menu will appear.
2
Press POINT DOWN button and a red-arrow icon will appear.
Move arrow to INPUT source that you want to select, and then
press SELECT button.
WHEN SELECT INPUT 1 (COMPUTER INPUT TERMINALS )
1
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button to move a red frame pointer to
INPUT Menu icon.
Press POINT DOWN button to move a red arrow pointer to Input
2
1 and then press SELECT button. Source Select Menu will
appear.
3
Move a pointer to either Digital or Analog and then press
SELECT button.
When your computer is connected to COMPUTER
Digital
INPUT (DIGITAL) terminal, select RGB (Digital).
When your computer is connected to COMPUTER INPUT
Analog
(ANALOG) terminal, select RGB (Analog).
When connect a computer output [5 BNC Type (Green, Blue, Red,
Horiz. Sync and Vert. Sync.)] from a computer to G, B, R, H/HV and V
jacks.
1
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button to move a red frame pointer to
INPUT Menu icon.
2
Press POINT DOWN button to move a red arrow pointer to Input
2 and then press SELECT button. Source Select Menu will
appear.
Press POINT DOWN button and a red-arrow icon will appear.
3
Move arrow to "RGB", and then press SELECT button.
22
SELECTING INPUT SOURCE
SELECTING COMPUTER SYSTEM
WHEN SELECT INPUT 2 (5 BNC INPUT JACKS )
INPUT button
INPUT 1
INPUT 2
INPUT 3
INPUT Menu icon
INPUT MENU
INPUT Menu icon
Move a pointer (red arrow) to
Input 1 and press SELECT
button.
Input 1
Source Select Menu
Move a pointer to Digital or
Analog and press SELECT
button.
INPUT MENU
INPUT Menu icon
Move a pointer (red arrow) to
Input 2 and press SELECT
button.
Input 2
Source Select Menu
Move a pointer to RGB and
press SELECT button.