Panasonic PT-DZ570U Manual da rede - Página 32

Procurar online ou descarregar pdf Manual da rede para Projetor Panasonic PT-DZ570U. Panasonic PT-DZ570U 42 páginas. Dlp based projector
Também para Panasonic PT-DZ570U: Especificações (4 páginas), Brochura (2 páginas)

Imprimir página

Using Web Browser (continued)

E-mail setup page

With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail message can be

sent to one or more preset e-mail addresses (maximum two addresses).

Click [Detailed set up], then [E-mail set up] to display the E-mail setup page.

Select Enable to use the e-mail function.

Enter the IP address or server name of the e-mail

server (SMTP). The DNS server must be set if the

server name is entered.

Enter the e-mail address of the projector.

(maximum 63 characters)

Enter the e-mail address of your desired recipient.

Select the conditions for sending e-mail.

MAIL CONTENTS:

ERROR:

LAMP RUNTIME:

INTAKE AIR TEMPERATURE: Intake air temperature has reached the value set in the field.

Select [NORMAL] or [SIMPLE].

An error is detected by self-diagnosis.

Remaining lamp service time has reached the value set in the field.

The user can enter the location of, for example,

the installed projector so that the recipient may

easily identify the originator of the e-mail.

(maximum 63 characters)

The user can modify the minimum time interval

of temperature warning mail. The default value

is 60 minutes. In this case, the user cannot send

another mail for 60 minutes after sending previous

temperature warning mail even the set warning

temperature is reached again.

Select the temperature of the intake sensor at

which to send a warning message.