Panasonic PT-JX200FBE Manual de instruções de instalação - Página 7

Procurar online ou descarregar pdf Manual de instruções de instalação para Projetor Panasonic PT-JX200FBE. Panasonic PT-JX200FBE 30 páginas.

Product composition

Check that the package contains the following parts. The number enclosed in < > is the quantity.

Attachment plate <1>

Falling prevention wire

Projector mount bracket <1>

Adapter cover <1>

String <1>

Power cord

(K2CM3YY00038) <1>

(K2CT3YY00078) <1>

Screw with captive washer (M4 x 8) <8>

(ET-JPC200BE: XYN4+F8FJK)

(ET-JPC200WE: 4112055002)

Attention

z After removing the product from the package, dispose of the power cord cap and packing material appropriately.

z The supplied power cord should not be used with projectors other than specified.

z If any part is missing, please contact the dealer.

z Store small parts appropriately in a place out of the reach of infants and small children.

The attachment plate is mounted to the wall or ceiling to

support the entire product.

The falling prevention wire is secured with tape at the

inner side of the attachment plate.

The projector mount bracket is mounted to the projector

and then attached to the attachment plate.

The adapter cover hides the <AC IN> socket part of the

projector.

This is to prevent the adapter cover from dropping.

Connect to the <AC IN> socket of the optional projector.

These are used to mounting or assembling the product.

ENGLISH - 7