Panasonic PT-L6510E Manual de Instruções - Página 34
Procurar online ou descarregar pdf Manual de Instruções para Projetor Panasonic PT-L6510E. Panasonic PT-L6510E 50 páginas. 3600 ansi lumens sxga lcd projector 4200 ansi lumens xga lcd projector
Também para Panasonic PT-L6510E: Brochura e especificações (6 páginas)
Imprimir página
OPTION 1 settings
1. Obtain the MENU window and select
(highlight) the desired adjustment item
with the
or
or remote control).
2. Adjust the parameter value for the
selected item with the
OPTION 1
OSD
RGB FORMAT
LENS SHIFT
BACK COLOUR
FRONT/REAR
DESK/CEILING
SELECT
ADJ
OSD (On-Screen Display)
ON: The name of the signal applied is displayed in
the upper left corner of the screen whenever
the input signal source is switched from one to
another.
OFF: The signal name is not displayed even when
an input source switching occurs.
RGB FORMAT
"RGB FORMAT" is used to select the video signal
format depending on the signal applied to the RGB1
or RGB2 port: Only HDTV (1080i)
RGB FORMAT
LENS SHIFT
"LENS SHIFT" is convenient for adjusting vertical
picture position in situations where the projector is
not easily accessible.
LENS SHIFT
button: Shifts the picture upward.
button: Shifts the picture downward.
Note
• The screen picture move reverse direction
when press the
set up condition.
34
buttons (on the projector
or
buttons.
OFF
ON
Y•PB•PR
BLUE
FRONT
DESK
ESC
RGB
Y•PB•PR
or
button under the ceiling
BACK COLOUR
"BACK COLOUR" is used to choose the background
colour from blue or black when no signal is applied to
the video input ports:
BACK COLOUR
BLUE
BLACK
BLUE:
Sets background colour to blue.
BLACK: Sets background colour to black.
Note
• If a signal with unknown or unidentifiable format
is applied, it will be regarded as no signal and
the screen be set to the selected background
colour.
PROJECTION SCHEME 1
PROJECTION SCHEME 1 is used to choose the
appropriate projection scheme from Front and Rear:
FRONT/REAR
FRONT
REAR
FRONT: Choose this option if pictures are projected
from the front of a reflective screen.
REAR: Choose this if pictures are projected from
the back of a translucent screen.
PROJECTION SCHEME 2
PROJECTION SCHEME 2 is used to choose the
appropriate projection scheme from Floor and Ceiling:
DESK/CEILING
DESK
CEILING
FLOOR: Choose this option if the projector is installed
on a floor-standing base.
CEILING: Choose if the projector is installed on the
ceiling using the optional ceiling mount
bracket.