Diamond Vantage TS400 Manual do Proprietário - Página 9
Procurar online ou descarregar pdf Manual do Proprietário para Serra Diamond Vantage TS400. Diamond Vantage TS400 20 páginas.
Imprimir páginaVII. TS400: SAFE OPERATING PRACTICES FOR TILE SAW
WARNING!
For your own safety and the safety of others, do
not attempt to operate this saw until you have
read and understood the general safety rules
for all power tools and the following additional
safety precautions particular to this saw.
WARNING!
Do not perform any operation freehand, that
is without holding the tile in place against the
fence and guide.
WARNING!
Never reach in back of cutting wheel.
WARNING!
Never cross arms in front of cutting wheel.
WARNING!
Keep hand out of path of cutting wheel.
1.
Always wear approved hearing, eye, head and
respirator safety protection.
2.
Read and understand the symbol definitions
contained in this manual.
3.
Read and understand all warnings and
instructions on the machine.
4.
Read all safety materials and instructions that
accompany any blade or accessory used with this
machine.
The dust generated by cutting of tile, marble,
stone, bricks etc. can be harmful to your health.
Always operate machinery in well ventilated
areas and provide proper dust removal. Always
wear a dust mask approved for respiratory
protection against these types of dusts and mists.
5.
6.
7.
8.
9.
10. Be sure that the blade arbor hole matches the
11. Install the blade with the arrow pointing in the
• 9 • diamondvantage.com
WARNING!
Establish a training program for all operations of
this machine.
Always provide a copy of this manual to
equipment user.
Always select a diamond blade according to the
manufacturer's recommendation suitable for the
material to be cut. Never use a blade having a
maximum operating speed lower than the "No
load R.P.M." marked on the tool nameplate. Do
not operate any saw without safety guards in
place or with a blade diameter larger than the
maximum saw blade capacity.
Before mounting a blade on the saw, clean and
inspect the arbor shaft, blade flanges and the
diamond blade for uneven wear or damage. Do
not operate the tool if it appears to be damaged.
Have it serviced by a qualified technician.
Before each use of the saw, inspect the diamond
blade for hairline fatigue cracks. If such a crack
or flaw is evident, discard the blade. Using a
damaged diamond blade may cause injury to the
operator or others.
blade adapter flange supplied with the saw. Use
only blade adapter flanges that came on your
saw. Never use damaged or worn blade adapter
flanges.
same direction as the rotation of the arbor shaft
or the arrow on the blade guard. Be sure to
tighten the blade shaft arbor nut with the wrench
provided but be careful not to over tighten.