Panasonic SA-AK48 Manual de Instruções - Página 22
Procurar online ou descarregar pdf Manual de Instruções para Sistema estéreo Panasonic SA-AK48. Panasonic SA-AK48 32 páginas. Cd stereo system model no. sc-ak48
Também para Panasonic SA-AK48: Manual de Instruções (33 páginas)
Imprimir página
3
TAPE
DECK 1/2
TUNE TIME ADJ
1
DECK 2
OPEN
2
REV MODE
3
CD
5
1
CD
1
2
TUNE MODE
6
aREC/STOP
22
RQT5321
Tape direction
CD
5
Recording from compact discs
Press [c DECK 2 OPEN], and insert the tape.
1
5
Close the holder by hand.
Tape direction is automatically set to " 3".
2
Press [REV MODE] to select the reverse mode.
Every time you press the button:
2
: One side is recorded, then recording stops auto-
1
matically.
: Both sides (front side
,
recorded, then recording stops automatically.
6
Press [CD].
3
Insert CD in the tray.
4
(Perform steps 1 ~ 2 on page 14).
Press [(CD 1) ~ (CD 5)] to select the disc you want.
5
Pressing [L] will stop playback.
Press [a REC/STOP] to start recording.
6
•
If you selected " ,
automatically change to "
•
The recording will proceed from the first track on the selected
CD and will continue on through the last track of the final
disc (page 14).
•
The tape deck stops automatically when the CD is finished.
To stop recording
•
To add a 4 second silent interval before stopping
Press [L]. The CD will stop automatically too.
•
To stop recording without a silent interval
Press [a REC/STOP]. The CD will stop automatically too.
To start recording on the reverse side
Load a tape and change the tape direction as follows:
1. Press [TAPE, DECK 1/2] and select tape deck 2.
2. Press [/] and immediately thereafter [L]. The tape direction will
be shown as "4".
To record from a specific point on a tape
Before recording, advance the tape to the point from where you want
to start recording.
To record programmed tracks
1. After step 4, program the track you want (perform steps 2 – 6
on page 16).
2. Press [a REC/STOP] to start recording.
reverse side) are
" in step 2, the direction will
" when recording starts.