Panasonic SA-PMX3 Manual de Instruções - Página 12
Procurar online ou descarregar pdf Manual de Instruções para Sistema estéreo Panasonic SA-PMX3. Panasonic SA-PMX3 18 páginas. Cd stereo system model no. sc-pmx3
Imprimir página
USB (continued)
CD
By main unit only
Recording speed:
CD to USB device
CD-RW to USB device: Two times (2x) the normal speed.
1
Connect the USB device.
2
Insert the CD you want to record.
Press [6, CD] and then [7].
3
3
4
Press [¶CD
USB HI-SPEED AUTO REC] to start recording.
7 Limitations of high-speed recording
This unit uses a copy management system to limit the use of high-
speed recording.
• You are unable to perform a second high-speed recording
from the same CD within 74 minutes upon the completion of
the fi rst high-speed recording.
(You are able to perform the second recording at the normal speed.)
"PLEASE WAIT XX MIN" will be displayed if you try to perform a
second high-speed recording.
"XX MIN" – the number of minutes you need to wait prior to
performing the second recording.
• You are unable to perform high-speed recording if the USB's
remaining REC (recording) time is shorter than the CD
album's total playback time.
"CAN'T REC" will be displayed.
• You can record up to 24 discs within 74 minutes.
If you completed recording 24 discs within approximately 74
minutes, you will not be able to record the twenty-fi fth disc.
Note
• Depending on the condition of the disc, it may not be possible
to record at four times the normal speed or perform high-speed
recording. Record the CD at normal speed.
• The sound is muted during high-speed recording.
Recording from CD using analogue format
CD
You can change your recording mode from the default digital
recording to analogue recording.
1
Press [6, CD] and then [7].
2
Press and hold [EDIT MODE] to select "ANALOG-REC".
Each time you press and hold the button:
ANALOG-REC
(analogue recording)
Note
• The recording mode returns to the default "DIGITAL-REC" after
completing the analogue recording.
• High-speed recording is not applicable while using analogue mode.
Display function
This function allows you to display the information during recording.
Press [DISPLAY] repeatedly during USB recording mode.
CD
USB remaining
MP3
Elapsed play
time
USB
Recording
remaining
REC mode
REC time
Note
12
When an iPod is connected, the USB's remaining REC (recording)
time will not be displayed.
12
PMX3_E_EN.indd 12
PMX3_E_EN.indd 12
High-speed recording
: Four times (4x) the normal speed.
DIGITAL-REC
(digital recording)
Elapsed
Remaining
play time
play time
Recording
REC time
REC mode
Remaining
Album
play time
name
ID3
ID3
(Artist)
(Track)
Recording from other sources
Recording from other sources
Connect the USB device.
1
2
Select the source to be recorded.
Radio recording:
Tune in the station ( ➡ page 8)
MUSIC PORT:
Play the portable audio equipment. ( ➡ page 15)
OPTION port:
Select the desired track to be recorded and play the connected
equipment. ( ➡ page 14)
Press [¶¥8, USB] to start recording.
3
"REC" is displayed and recording indicator blinks.
To
Stop recording
Pause recording
Erase a recorded
track
Note
• A track mark is inserted each time you pause. ( ➡ see below)
• You cannot change to other sources during pause recording.
Adding track marks
You can add track marks where the track changes on the radio or
the other equipment. These marks separate tracks during recording.
They can be added automatically or manually during recording.
Before recording
Press [EDIT MODE] repeatedly to select your desired track
mark mode.
Radio:
Each time you press the button:
MUSIC PORT or OPTION port:
Each time you press the button:
Edit Mode
MANUAL
TIME MARK
SYNCHRO
During recording
Press [EDIT MODE] to add track mark using MANUAL or TIME
MARK mode.
Note
If you press [EDIT MODE] while using TIME MARK mode during
recording, the fi ve-minute counter will be reset.
Track
name
ID3
(Album)
Action
Press [7].
"WRITING" is displayed for a few second.
Press [¶¥8, USB].
"REC" fl ashes.
Press again to resume recording.
( ➡ page 13)
MANUAL
TIME MARK
MANUAL
SYNCHRO
TIME MARK
Action
Track marks are inserted manually.
Track marks are inserted automatically
every fi ve minutes.
Recording automatically starts when the
other equipment starts to play.
Recording will pause when it does not
detect any sound for approximately 3
seconds.
6/17/08 10:15:23 AM
6/17/08 10:15:23 AM