Biometrics Direct BioCert FS-100 Manual de instruções - Página 13

Procurar online ou descarregar pdf Manual de instruções para Por fechaduras Biometrics Direct BioCert FS-100. Biometrics Direct BioCert FS-100 18 páginas.

Imprimir página

Unlocking and Entering Your Door

Illustrates the operation method when a registered user enters from
outside.
Step Description
1
Press the START button.
2
When the
3
When the
on the scanner for about 1~3 seconds.
4
If the fingerprint matches with the registered template, the door will
be unlocked and the
Access is Granted.
5
If the fingerprint does not match with the previously registered
template, four beeping sounds will be heard and with the
blink. Access is Denied.
-
The lock stays in 'open' mode for 5 seconds and will be locked
automatically if it is not opened during this time.
-
Turn the safety bolt on from inside, then no one may get access
either with fingerprints or PIN codes.
-
Turn the safety bolt off and swing the indoor handle to open the
lock.
-
If an unregistered person tries to open the door more than five
times, the system will get into five-minute interval. This is to prevent any
power drain caused by children's mischief or any intentional abuse.
-
Emergency
Under the condition that the FP system cannot work, you can uncover the
keypad cover and input the previously set PIN codes to open the lock. If
the interior battery supply doesn't work normally, plug a 9V battery into the
exterior power socket underneath the keypad and input the correct PIN
codes to open the lock.
Biometrics Direct – BioCert FS-100 Door Lock
yellow
LED blinks, you will hear the system beep once.
red
scanning light flashes, place your registered finger
green
LED will blink and the system will beep.
Red
LED will
Page 13